K8AK-PA1 | OMRON Three-phase Asymmetry and Phase-sequence Phase-loss Relay K8AK-PA1

K8AK-PA1 Introduce | K8AK-PA1 Catalog / Manual / Instructions / Software download

OMRON K8AK-PA1 Manual And Instructions
K8AK-PA1 datasheetPDF datasheet

OMRON K8AK-PA1 Product information and technical parameters：
Brand: OMRON
Name: Three-phase Asymmetry and Phase-sequence Phase-loss Relay
Model: K8AK-PA1
Rated input: 3-phase 3-wire mode, 3-phase 4-wire mode;
200, 220, 230, 240 VAC, 115, 127, 133, 138 VAC.
Ideal for 3-phase Voltage Asymmetry.
Monitoring for Industrial Facilities and Equipment.
Greater resistance to inverter noise.
Monitor voltage asymmetry, phase sequence, and phase,
loss for three-phase 3-wire or 4-wire power supplies with just one Unit.
Switch setting for 3-phase 3-wire or 3-phase 4-wire power supply.
One SPDT output relay, 5 A at 250 VAC (resistive load).
World-wide power specifications supported by one Unit (switchable).
Relay status can be monitored using LED indicator.

Model: PL (back-mounting), page 26, Solder terminals.
Approx: 17 g.
Number of pins: 20 pins.
A Wide Variety of Square and,
Round Sockets in Front-mounting,
and Back-mounting Models,
Models available with finger protection.
Hold-down Clips and Socket Bridges for PYF Sockets,
are also available OMRON K8AK-PA1.
New screwless models available. Control power supply voltage: 125 VDC.
Input: DC, Input voltage range, 10 to 300 V K8AK-PA1
Overvoltage/Undervoltage Monitoring.
Relay for AC and DC Input.
Detect overvoltages or undervoltages (switch select,
able) from 4 mV to 300 V.
Detect undercurrent, reverse current, or overcurrent in,
DC circuits using shunt (SDV-FL).
Detect three-phase AC current for under and/or overcur,
rent using current converter OMRON K8AK-PA1.
Available in 7 supply voltage configurations.
Single-function model with ON-delay, OFF-delay, or star,
tup lock settings (SDV-FH@T).
Select either AC or DC voltage input.
Polarity can be specified (SDV-FL) to enable easy re,
verse current detection.
Selectable reset value range from 2% to 30% of operat,
ing value (SDV-F).
LED operation indicator OMRON K8AK-PA1.
UL/CSA approval (SDV-F@). Type: Reverse wiring.
Cable length L: 1.5 m.
Connect Connector-Terminal,
Block Conversion Units (XW2@) to,
I/O Units for Programmable,
Controllers with one touch. Type: Cable with Connector on One End,
(one ferrite core provided, 30-dia × 39 mm).
Cable length: 5 m.
The highest level of ionization in its class.
Sensing and variable-AC system provides fast and meticulous ionization.
Linked Ionizers cover a wide area without causing uneven ionization.
Digital ion display provides simple and reliable settings. Cable: With cable.
Connector: Connectors on both cable ends.
Cable length L: 0.5 m.
Minimum order: 5 K8AK-PA1.
Small Round Water-resistive.
Connectors.
Water-resistive, compact connector meets IP67 requirements.
Conventional M8 screw-mounting models are available along with,
S8 snap-in models that connect and disconnect with one toucch K8AK-PA1.
Ideal for a wide variety of FA and OA applications.
Connectors on both cable ends require no harness work.
Some new M8 models with 3 or 5 poles.

...More relevant models >>>>