OMRON K3HB-SSD-AT12 Manual K3HB-SSD-AT12 Communications Manual

Category: external supply 100mA DC10V.
Input type: load sensor, mV input type.
Event input terminal 5 points (TIMING, S-TIM, HOLD, RESET, ZERO) is equipped with.
BCD+ transistor: -- NPN open collector (5 bit output +HH, H, PASS, L, LL).
96 (W) * 48 (H * 95mm) depth.
Power supply voltage: AC/DC24V K3HB-SSD-AT12 Communications Manual.
To support the sensor input, the pressure, load, torque and weight were measured,
Is an ideal indicator for judging whether an automatic device and a screening device are qualified K3HB-SSD-AT12
Action determine the color, can switch the green / Red 2 kinds of color display.
Equipped with the sub pressure gauge for monitoring the operation trend.
Digital Time Interval Meter for Measuring.
Passing Speed, Time, or Cycle between Two K3HB-SSD-AT12 Communications Manual.
Points.
Visual confirmation of judgement results through display colors that,
switch between red and green.
Measures Wide Range of Pulse Interval Times.
Measures, calculates, and displays pulse intervals between two points.
Wide range for pulse interval measurements, from 10 ms to 3,200 s, max.
Six Measurement Operations, Including Passing Speed, Time, and,
Cycle Measurement between Two Points K3HB-SSD-AT12 Communications Manual.
One Digital Time Interval Meter has six measurement functions, to support a,
variety of pulse interval measurement applications. Select the best function,
for your application from the following: Passing speed, cycle, time difference,
time band, measuring length, and interval.
DeviceNet models added to the series. A high-precision Heater Element.
Burnout Detector compatible with a,
wide-range of heater control methods.
Push-in terminals reduce the workload.
Scaling.
NPN or PNP equivalent output.
Lineup includes models compatible with many heater control methods,
including ON/OFF control, phase control, and cyclic control K3HB-SSD-AT12 Manual.
High-precision heater burnout alarm with digital measurement.
Contributes to preventative maintenance.
If the gate function is disabled, the gate input can be used as an,
undercurrent/overcurreent relay or for motor or lamp loads K3HB-SSD-AT12 Manual.
Undercurrent detection values can be set separately for CT1 and CT2.
CE marking and cUL certified (K8AC-H2@@@).