OMRON GRT1-DRT Manual GRT1-DRT INSTRUCTIONS REFERENCE MANUAL

Terminal (Wire connection): Screw terminal.
Classification: Standard.
Latching lever (Test switch): No.
Rated input voltage: DC, 24V.
Global standard size, low profile slim.
I/O relay with width 6.2 mm.
Realized about 25% lower profile than conventional.
products, contributing to further miniaturization of the control panel GRT1-DRT INSTRUCTIONS REFERENCE MANUAL.
Realized opening and closing ability with one pole 6 A slim shape GRT1-DRT
Micro load products for one pole 50 mA using Au-plated.
contacts for small load switching also available.
Since G2RV is a transparent case, confirming the state of,
the contact with the naked eye is possible, and easy to,
confirm abnormality on-site (installed location).
Screw terminal is also stocked to meet the screw type needs GRT1-DRT INSTRUCTIONS REFERENCE MANUAL.
Mounted relay uses plug-in terminals that are difficult to,
bend when exchanging. Cable with connector (1 to 2) /G79-I_-_-D1,
G79-O_-_-D1, G79-M_-_-D1.
Size: A, 750mm; B, 500mm.
Cable and loose wire cable with loose wire pressing connecting terminal,
Connector cable, MITSUBISHI motor produced PLC connection cable. Isolation: Photocoupler.
Zero cross function: -- GRT1-DRT INSTRUCTIONS REFERENCE MANUAL.
Indicator: Yes.
Rated output load: 3 A at 5 to 110 VDC.
Rated input voltage: 5 to 24 VDC.
International Standards for G3B Series,
Same Profile as MK Power Relays.
Shape-compatible with mechanical relays.
Certified by UL, CSA, and VDE (models numbers with a suffix of “-VD”).
Plug-in type, same size as MK Power Relays.
Operation indicator provided to confirm input.
DC Output model available with 3 to 125-VDC load voltage,
range for high-voltage applications. Cable with connector (1 to 2) /G79-I_-_-D1,
G79-O_-_-D1, G79-M_-_-D1.
Size: A,, 500mm; B, 250mm GRT1-DRT Manual.
Cable and loose wire cable with loose wire pressing connecting terminal,
Connector cable, MITSUBISHI motor produced PLC connection cable. MITSUBISHI motor produced PLC connection cable.
Size: A, 3000mm; B, 1750mm. GRT1-DRT Manual.
Output use.
Cable and loose wire cable with loose wire pressing connecting terminal,
Connector cable, MITSUBISHI motor produced PLC connection cable.