Home
>> Products
>> OMRON
>> Switch
>> The micro switch
>> general micro switch
>> X-10GM22 | OMRON General-purpose Basic Switch X-10GM22
X-10GM22 | OMRON General-purpose Basic Switch X-10GM22
OMRON X-10GM22 Manual And Instructions
X-10GM22 datasheetPDF datasheet
OMRON X-10GM22 Product information and technical parameters：
Brand: OMRON
Name: General-purpose Basic Switch
Model: X-10GM22
Terminal: Solder terminal.
Actuator: Reverse short hinge roller lever.
Direct Current Switch with.
Built-in Magnetic Blowout.
Incorporates a small permanent magnet in the contact.
mechanism to deflect the arc to effectively extinguish it.
Same shape and mounting procedures as the Z Basic Switches.
...More relevant models >>>>
X-10GM22 datasheetPDF datasheet
OMRON X-10GM22 Product information and technical parameters：
Brand: OMRON
Name: General-purpose Basic Switch
Model: X-10GM22
Terminal: Solder terminal.
Actuator: Reverse short hinge roller lever.
Direct Current Switch with.
Built-in Magnetic Blowout.
Incorporates a small permanent magnet in the contact.
mechanism to deflect the arc to effectively extinguish it.
Same shape and mounting procedures as the Z Basic Switches.
Type: rectangle.
Screen mode: level 2.
Using voltage: DC5V.
Operating above color: blue.
Color: white.
Micro design, the length of the body is only 23mm.
LED has five colors (red, yellow, green, white, and blue).
Chip LED to produce a uniform surface brightness.
From the front panel installation, more convenient OMRON X-10GM22. Direct Current Switch with.
Built-in Magnetic Blowout.
Incorporates a small permanent magnet in the contact X-10GM22
mechanism to deflect the arc to effectively extinguish it.
Same shape and mounting procedures as the Z Basic Switches. Actuator: Coil spring (spring diameter: 6.5).
Hermetic, Molded terminals, -139 models.
Select the Best Two-circuit Switch for the,
Operating Environment and Application,
from a Wide Range of Models,
A wide selection of models is available, including General-purpose,
Environment-resistant, and Spatter prevention Switches OMRON X-10GM22.
Standard-feature gold-clad crossbar contacts provide high reliability.
Applicable to either standard loads or microloads.
Switches with Lever Actuators provide 90° overtravel,
one-side operation, and four-direction head mounting OMRON X-10GM22.
Approved standards: EN/IEC, UL, cUL, and CCC.
Contact your OMRON representative for information on approved models. Appearance: Round/Projection type LED voltage-reduction lighting,
(without Voltage Reduction Unit)A22L-T.
Output: SPST-NC + SPST-NC.
Lighting: LED.
Operating voltage: 100 VAC.
Operation: Alternate operation (self-holding).
Illumination color: R (red); Y (yellow); G (green); W (white); A (blue).
Install in 22-dia. or 25-dia. Panel Cutout.
(When Using a Ring).
Lever for easily mountingg and removing the Switch Unit X-10GM22.
Increase wiring efficiency with three-row mounting of Switch Blocks.
Finger protection mechanism on Switch Unit provided as a standard feature.
Use 25-dia. ring to install in 25-dia. panel cutouts.
Mounteed using either open-type (fork-type) or closed-type X-10GM22.
(round-type) crimp terminals.
IP65 oil resistance (non-lighted models).
IP65 (lighted models).
Screen mode: level 2.
Using voltage: DC5V.
Operating above color: blue.
Color: white.
Micro design, the length of the body is only 23mm.
LED has five colors (red, yellow, green, white, and blue).
Chip LED to produce a uniform surface brightness.
From the front panel installation, more convenient OMRON X-10GM22. Direct Current Switch with.
Built-in Magnetic Blowout.
Incorporates a small permanent magnet in the contact X-10GM22
mechanism to deflect the arc to effectively extinguish it.
Same shape and mounting procedures as the Z Basic Switches. Actuator: Coil spring (spring diameter: 6.5).
Hermetic, Molded terminals, -139 models.
Select the Best Two-circuit Switch for the,
Operating Environment and Application,
from a Wide Range of Models,
A wide selection of models is available, including General-purpose,
Environment-resistant, and Spatter prevention Switches OMRON X-10GM22.
Standard-feature gold-clad crossbar contacts provide high reliability.
Applicable to either standard loads or microloads.
Switches with Lever Actuators provide 90° overtravel,
one-side operation, and four-direction head mounting OMRON X-10GM22.
Approved standards: EN/IEC, UL, cUL, and CCC.
Contact your OMRON representative for information on approved models. Appearance: Round/Projection type LED voltage-reduction lighting,
(without Voltage Reduction Unit)A22L-T.
Output: SPST-NC + SPST-NC.
Lighting: LED.
Operating voltage: 100 VAC.
Operation: Alternate operation (self-holding).
Illumination color: R (red); Y (yellow); G (green); W (white); A (blue).
Install in 22-dia. or 25-dia. Panel Cutout.
(When Using a Ring).
Lever for easily mountingg and removing the Switch Unit X-10GM22.
Increase wiring efficiency with three-row mounting of Switch Blocks.
Finger protection mechanism on Switch Unit provided as a standard feature.
Use 25-dia. ring to install in 25-dia. panel cutouts.
Mounteed using either open-type (fork-type) or closed-type X-10GM22.
(round-type) crimp terminals.
IP65 oil resistance (non-lighted models).
IP65 (lighted models).
...More relevant models >>>>
Last one: OMRON General-purpose Basic Switch X-10GM
next one: OMRON General-purpose Basic Switch X-10GM2
Related download