KM20-CTF-CB3 | OMRON Smart Power Monitor KM20-CTF-CB3

Appearance: Sensor head: 1.5 m type.
Temperature: Measurement range, –25 to 60°C;
Measurement precision, ±0.3°C (at 25°C); Resolution, 0.1°C.
Relative humidity: Measurement range, 0 to 99%;
Measurement precision, ±2.5% (at 25°C, 10 to 85%); Resolution, 0.1%.
Weight (packaged): Approx. 300 g.
Accessories: Mounting screw (M3 x 8) x 1 OMRON KM20-CTF-CB3.
Easy temperature and humidity control with an SD Card KM20-CTF-CB3 Appearance: Sensor head: Anchored type.
Temperature: Measurement range, 0 to 60°C;
Measurement precision, ±0.3°C (at 25°C); Resolution, 0.1°C.
Relative humidity: Measurement range, 20 to 85%;
Measurement precision, ±2.5% (at 25°C, 10 to 85%); Resolution, 0.1%.
Weight (packaged): Approx. 300 g.
Accessories: Mounting screw (M3 x 8) x 1 Caps to secure cable,
(one for each, front and rear) OMRON KM20-CTF-CB3.
Easy temperature and humidity control with an SD Card. Air purification unit.
Apply: 250mm.
Power specifications: DC24V.
The more thin, more large wind ZN series flexible and quickly realize the cleaning.
Can be based on the size of the clean room selection of 3 sizes. Product name: Logging unit.
Power supply: Battery/DC cable OMRON KM20-CTF-CB3.
Easy and Quick "Checking Power"at the Worksite. Condensed in the control cabinet for all power monitoring function.
Intelligent electric power monitor conforming to the international standard.
The design, installation, wiring, assembly and other issues can be resolved by the 1.
Small and optional measurement of multiple loops. Item (Measured particle diameter): Air Particle Sensor,
Dust measurement type, 5 µm (10 µm), 20 µm (30 µm), 50 µm min.
Make your entire production environment visible.
Multi-point monitoring of environmental data and central control. Application: 410 × 410 mm.
Power supply: 24 VDC.
The ZN series is even thinner and,
sports improved air volume.
These products enable cleaning that,
is both fast and flexible.
Three sizes are available to match various sizes of clean booths. Rated primary current: 50 A.
Rated secondary current: Special output.
Installation: Installed separately.
High-performance Power Monitor Suitable for On-panel Mounting and Display.
Assists Energy-saving Analysis.
Energy classification for wasted standby and stopped power.
(Classification based on external inputs is also supported.)
Power and current can be measured simultaneously.
Measurement of flow rates with a pulse conversion function.
Simple temperature measurements with Temperature Sensor included in the Unit.
High-precision Measurements.
Measurement of generated power (regenerative power),
leading reactive power, lagging reactive power, and consumed power.
Power measurements on the primary side of inverters,
which are widely used to save energy.
Automatic range switching for accurate measurement of standby and stopped power.
Energy-saving Functions.
Conversion to monetary cost. (Also used for classified standby and stopped power KM20-CTF-CB3. )
Alarm outputs can be selected for active power, reactive power,
regenerative power, current, voltage, or power factor.
The Power Monitor can log measurement data and supports Modbus communications.
Installation and Settingss KM20-CTF-CB3.
Direct measurement of three-phase, four-wire, 400-V line voltage.
Simple measurements without voltage wiring.
Incorrect voltage wiring detection.