K8AK-AW2 100-240VAC | OMRON Single-phase Overcurrent/Undercurrent Relay K8AK-AW2 100-240VAC

K8AK-AW2 100-240VAC Introduce | K8AK-AW2 100-240VAC Catalog / Manual / Instructions / Software download

OMRON K8AK-AW2 100-240VAC Manual And Instructions
K8AK-AW2 100-240VAC datasheetPDF datasheet

OMRON K8AK-AW2 100-240VAC Product information and technical parameters：
Brand: OMRON
Name: Single-phase Overcurrent/Undercurrent Relay
Model: K8AK-AW2 100-240VAC
Setting range: 0.1 to 1 A AC/DC, 0.5 to 5 A AC/DC.
Power supply voltage: 100 to 240 VAC.
Ideal for Current Monitoring for.
Industrial Facilities and Equipment.
Monitor for overcurrents and undercurrents simultaneously.
Separate settings and outputs supported for overcurrents and undercurrents.
Use commercially available CTs (CT current on secondary,
side: 0 to 1 A or 0 to 5 A).
Manual resetting and automatically resetting supported by one Relay.
Startup lock and operating time can be set separately.
Two sets of SPDT output contacts, 5 A at 250 VAC (resistive load).
Output status can be monitored using LED indicator.
Inputs are isolated from the power supply.

Type: Medium-sensitivity models.
Sensed current: 100 mA/200 mA (switchable).
Type: Delayed models.
Operating time: 0.3/0.8 s (switchable).
Economical, Compact, High-performance,
DIN 48 × 48-mm Ground Fault Relay for Low,
Voltages.
Performs continuous monitoring and detection of ground faults,
in low-voltage circuits due to the deterioration of insulation in,
electrical devices OMRON K8AK-AW2 100-240VAC K8AK-AW2 100-240VAC
Higher reliability ensured with improved resistance to high-fre,
quency noise when used for inverter loads.
Ground Fault Relays and through-type ZCTs (zero-phase current,
transformers) are mutually compatible.
The through-type ZCTs are equipped with test terminals,
allowing operation tests for Ground Fault Relays to be performed withease OMRON K8AK-AW2 100-240VAC. Cable Specifications: Fire-retardant, Robot cable.
Cable connection direction: L-shaped.
Cable diameter: 6.0 mm dia.
No. of cable cores: 4.
Cable core cross sectional area: 0.5 mm.
Cable length: 2 m.
DC.
Minimum order: 5.
UL-listed: Yes.
Water- and Environment-resistive FA.
Connectors Save Wiring and Maintenance Effort.
Compact FA connectors meet IP67 requirements and ensure a,
94V-0 fire retardant rating OMRON K8AK-AW2 100-240VAC.
A wide array of connectors makes a wiring system more modular,
simplifies maintenance, and reduces downtime.
Connectors with Cables and Connector Assemblies are available.
Three types of Connector Assembly: Crimping, soldering, and screw-on.
Connectors with Cables are UL certified.
Based on IEC61076-2-101 (IEC60947-5-2) and NECA 4202. Type: Cable with Connectors on Both Ends (RJ45/RJ45).
Category: Cat.5 .
Cable sheath material: PUR.
Cable color: Green.
Cable lengt: 1.5 m.
Cables and Connectors for,
EtherCAT® and Other Industrial,
Ethernet Networks. Input voltage: 400 ~ 500 VAC3 phase.
Rated power: 960W.
Output voltage: 24V.
Output current: 40A.

DIN guide rail installation, with 5 A ~ 40 A output current of the power supply K8AK-AW2 100-240VAC.
3 phase 400 ~ 500 VAC.
5, 10, 20 and 40 A; 24 VDC output.
High stability, low ripple and low noise level.
Compact design.
Add fuse protection.
Natuural draft。
In addition to the CE tag, but also in compliance with UL60950 (CSA22 K8AK-AW2 100-240VAC. 2-60950), UL508.
Conform to EN61000-3-2.
Parallel / series operation.

...More relevant models >>>>