Home
>> Products
>> OMRON
>> Control equipments
>> Timer / time switch
>> Analog timer
>> H3DS Series | OMRON Solid-state Timer H3DS Series
H3DS Series | OMRON Solid-state Timer H3DS Series
H3DS Series Introduce |
H3DS Series Model |
H3DS Series Catalog / Manual / Instructions / Software download
H3DS Series Catalog / Manual / Instructions / Software download
OMRON H3DS Series Manual And Instructions
H3DS Series datasheetPDF datasheet
OMRON H3DS Series Product information and technical parameters：
Brand: OMRON
Name: Solid-state Timer
Model: H3DS Series
DIN Track Mounted, Standard 17.5-mm Width Timer Range.
A wide AC/DC power supply range (24 to 230 VAC/ 24 to 48 VDC) reduces the number, of timer models kept in stock. (24 to 230 VAC/VDC with H3DS-XL@).
Smart Dial/Selector-locking Mechanism: Prevents the dials and selectors on the, Timer’s front panel from being inadvertently op.
erated or being operated without authorization. The lock can only be unlocked and, locked with an optional pen-type Lock Key.
Screw-Less Clamp type available. (H3DS-@LC).
Sticker provided for easy timer identification and management.
Terminal clamp left open when delivered (screw terminal type).
Finger protection terminal block to meet VDE0106/P100.
Enables easy sequence checks through instantaneous outputs for a zero,
set value at any time range.
Incorporates environment-friendly, cadmium-free contacts.
Conforms to EN61812-1 and IEC60664-1 4 kV/2 for Low Voltage, and EMC Directives.
...More relevant models >>>>
H3DS Series datasheetPDF datasheet
OMRON H3DS Series Product information and technical parameters：
Brand: OMRON
Name: Solid-state Timer
Model: H3DS Series
DIN Track Mounted, Standard 17.5-mm Width Timer Range.
A wide AC/DC power supply range (24 to 230 VAC/ 24 to 48 VDC) reduces the number, of timer models kept in stock. (24 to 230 VAC/VDC with H3DS-XL@).
Smart Dial/Selector-locking Mechanism: Prevents the dials and selectors on the, Timer’s front panel from being inadvertently op.
erated or being operated without authorization. The lock can only be unlocked and, locked with an optional pen-type Lock Key.
Screw-Less Clamp type available. (H3DS-@LC).
Sticker provided for easy timer identification and management.
Terminal clamp left open when delivered (screw terminal type).
Finger protection terminal block to meet VDE0106/P100.
Enables easy sequence checks through instantaneous outputs for a zero,
set value at any time range.
Incorporates environment-friendly, cadmium-free contacts.
Conforms to EN61812-1 and IEC60664-1 4 kV/2 for Low Voltage, and EMC Directives.
Count input: PNP/NPN universal DC voltage input (4.5 to 30 VDC).
Display: 7-segment LCD with backlight.
Max. revolutions displayed (applicable encoder resolution):
1000.0 s–1 (10 pulse/rev.), 1000.0 min–1 (600 pulse/rev.),
←→10000 min–1 (60 pulse/rev.) (switchable). ; Light-gray body.
Revolutions displayed up to five digits OMRON H3DS Series.
Dual revolution display according to encoder resolution used;
1000 s–1/1000 min–1 or 1000 H3DS Series0 s–1 /1000.0 min–1,
Switchable dual revolution display type available (-NV1 models);
extended up to 10000 min–1. Input type: high speed response type.
Event input terminal 5 points (TIMING, S-TIM, HOLD, RESET, ZERO) is equipped with.
External power supply DC12V80mA.
Output type: linear; voltage; NPN open collector (HH, H, PASS, L, LL) OMRON H3DS Series.
96 (W) * 48 (H * 95mm) depth.
Power supply voltage: AC/DC24V.
High speed, high precision measurement, determine the color display,
Can switch the green / Red 2 kinds of display colors.
Equipped with the sub pressure gauge for monitoring the operation trend.
External event input can be applied to a variety of measurement and identification situations OMRON H3DS Series.
Series of DeviceNet type.
The depth (panel below) is only short size 95mm.
UType: instantaneous contact.
Terminal configuration type: special terminal configuration.
Pin type: 8 pin.
Action mode / reset mode: time limit action / auto reset.
Output mode: contact output.
Installation method: embedded installation / front mounting.
1 units can be in 0.5 seconds to 120 seconds, select the 4 time range.
Achieved UL, CSA, NK, LR certification, in compliance with EN61812-1.
Conform to the CE mark, CCC. Highly Visible LCD Display with 2-color,
(Red and Green) LEDs.
Multi-range DC voltage/current input.
Front-panel key operation for easy setting.
Average processing function suppresses flicker.
Scaling, front-panel forced-zero, zero-limit functions H3DS Series.
Easy confirmation of max/min display.
Short 80-mm depth (measured from edge of face plate).
Finger protective cover (standard equipment) guards against electric shock.
Water- and dust-pproof NEMA4X (IP66 equivalent) front panel H3DS Series.
Recognized to U.S. and Canadian requirements under the Component,
Recognition Program of UL.
CE marking.
Display: 7-segment LCD with backlight.
Max. revolutions displayed (applicable encoder resolution):
1000.0 s–1 (10 pulse/rev.), 1000.0 min–1 (600 pulse/rev.),
←→10000 min–1 (60 pulse/rev.) (switchable). ; Light-gray body.
Revolutions displayed up to five digits OMRON H3DS Series.
Dual revolution display according to encoder resolution used;
1000 s–1/1000 min–1 or 1000 H3DS Series0 s–1 /1000.0 min–1,
Switchable dual revolution display type available (-NV1 models);
extended up to 10000 min–1. Input type: high speed response type.
Event input terminal 5 points (TIMING, S-TIM, HOLD, RESET, ZERO) is equipped with.
External power supply DC12V80mA.
Output type: linear; voltage; NPN open collector (HH, H, PASS, L, LL) OMRON H3DS Series.
96 (W) * 48 (H * 95mm) depth.
Power supply voltage: AC/DC24V.
High speed, high precision measurement, determine the color display,
Can switch the green / Red 2 kinds of display colors.
Equipped with the sub pressure gauge for monitoring the operation trend.
External event input can be applied to a variety of measurement and identification situations OMRON H3DS Series.
Series of DeviceNet type.
The depth (panel below) is only short size 95mm.
UType: instantaneous contact.
Terminal configuration type: special terminal configuration.
Pin type: 8 pin.
Action mode / reset mode: time limit action / auto reset.
Output mode: contact output.
Installation method: embedded installation / front mounting.
1 units can be in 0.5 seconds to 120 seconds, select the 4 time range.
Achieved UL, CSA, NK, LR certification, in compliance with EN61812-1.
Conform to the CE mark, CCC. Highly Visible LCD Display with 2-color,
(Red and Green) LEDs.
Multi-range DC voltage/current input.
Front-panel key operation for easy setting.
Average processing function suppresses flicker.
Scaling, front-panel forced-zero, zero-limit functions H3DS Series.
Easy confirmation of max/min display.
Short 80-mm depth (measured from edge of face plate).
Finger protective cover (standard equipment) guards against electric shock.
Water- and dust-pproof NEMA4X (IP66 equivalent) front panel H3DS Series.
Recognized to U.S. and Canadian requirements under the Component,
Recognition Program of UL.
CE marking.
...More relevant models >>>>
Last one: OMRON Mechatronic Analog Timer H3AM-NSR-C
next one: OMRON Solid-state Multi-functional Timer H3DS-ML
Related download
Related model