Home
>> Products
>> OMRON
>> Control equipments
>> Timer / time switch
>> Analog timer
>> H3CR-G Series | OMRON Solid-state Star-delta Timers H3CR-G Series
H3CR-G Series | OMRON Solid-state Star-delta Timers H3CR-G Series
H3CR-G Series Introduce |
H3CR-G Series Model |
H3CR-G Series Catalog / Manual / Instructions / Software download
H3CR-G Series Catalog / Manual / Instructions / Software download
OMRON H3CR-G Series Manual And Instructions
H3CR-G Series datasheetPDF datasheet
OMRON H3CR-G Series Product information and technical parameters：
Brand: OMRON
Name: Solid-state Star-delta Timers
Model: H3CR-G Series
DIN 48 × 48-mm Star-delta Timer.
A wide star-time range (up to 120 seconds) and star-delta.
transfer time range (up to 1 seconds).
...More relevant models >>>>
H3CR-G Series datasheetPDF datasheet
OMRON H3CR-G Series Product information and technical parameters：
Brand: OMRON
Name: Solid-state Star-delta Timers
Model: H3CR-G Series
DIN 48 × 48-mm Star-delta Timer.
A wide star-time range (up to 120 seconds) and star-delta.
transfer time range (up to 1 seconds).
Supply voltage: 100 to 240 VAC.
6-digit total counter/time counter: Black.
DIN 72 x 36-mm Total Counter/Time Counter with.
Easy-to-read Displays and Water and Oil.
Resistance Equivalent to IP66.
Large, easy-to-read displays: 15-mm-high characters for 6-digit mod,
els; 12-mm-high characters for 8-digit models OMRON H3CR-G Series.
High-visibility, negative transmissive LCD display with built-in red LED,
backlight at low power consumption H3CR-G Series
IP66 with oil resistance and NEMA4 are achieved by unifying the front,
with the casing case and using oil-resistant materials and parts.
Compact (66 mm) body.
Switch 6-digit models between total counter and time counter operation,
Just change a switch setting for either an NPN or PNP input OMRON H3CR-G Series.
Supports both external resetting and manual resetting.
Finger-protection terminal block cover prevents electrical shock and,
conforms to VDE0106, Part 100.
Safety standards: UL, CSA, EMC (EN 61326), CE Marking.
Input type: PNP input type.
Event input terminal 5 points (HOLD, RESET) equipped with.
External power supply DC12V80mA.
Note: K3HB-RPB-A, K3HB-RNB-A is not equipped with event input OMRON H3CR-G Series.
Communication: RS-232C; NPN open collector (HH, H, PASS, L, LL).
96 (W) * 48 (H * 95mm) depth.
Power supply voltage: AC100 ~ 240V.
Measurement of 2 points through the speed, time, or cycle of the digital time interval table.
Action determine the color, can switch the green / Red 2 kinds of color display.
Measurement of wide range of pulse interval time.
Measuring, calculating and displaying the pulse interval between 2 points.
Pulse interval measurement range, maximum measurableInput type: NPN/ voltage pulse input type.
Event input terminal 5 points (HOLD, RESET, COMPENSATION) is equipped with.
External power supply DC12V80mA.
No output: -.
96 (W) * 48 (H * 95mm) depth.
Power supply voltage: AC100 ~ 240V.
High speed pulse.
Measuring, increasing or decreassing pulse meter H3CR-G Series.
Action determine the color, can switch the green / Red 2 kinds of color display.
The best choice of rotating encoder and all kinds of ON/OFF pulse signal at high speed,
Cumulative pulse input is 50kHz, phase differrence pulse is 25kHz, increase or decrease of pulse is 30kHz H3CR-G Series.
Supports no voltage contact input to 30Hz.
The count value can be converted to any value
6-digit total counter/time counter: Black.
DIN 72 x 36-mm Total Counter/Time Counter with.
Easy-to-read Displays and Water and Oil.
Resistance Equivalent to IP66.
Large, easy-to-read displays: 15-mm-high characters for 6-digit mod,
els; 12-mm-high characters for 8-digit models OMRON H3CR-G Series.
High-visibility, negative transmissive LCD display with built-in red LED,
backlight at low power consumption H3CR-G Series
IP66 with oil resistance and NEMA4 are achieved by unifying the front,
with the casing case and using oil-resistant materials and parts.
Compact (66 mm) body.
Switch 6-digit models between total counter and time counter operation,
Just change a switch setting for either an NPN or PNP input OMRON H3CR-G Series.
Supports both external resetting and manual resetting.
Finger-protection terminal block cover prevents electrical shock and,
conforms to VDE0106, Part 100.
Safety standards: UL, CSA, EMC (EN 61326), CE Marking.
Input type: PNP input type.
Event input terminal 5 points (HOLD, RESET) equipped with.
External power supply DC12V80mA.
Note: K3HB-RPB-A, K3HB-RNB-A is not equipped with event input OMRON H3CR-G Series.
Communication: RS-232C; NPN open collector (HH, H, PASS, L, LL).
96 (W) * 48 (H * 95mm) depth.
Power supply voltage: AC100 ~ 240V.
Measurement of 2 points through the speed, time, or cycle of the digital time interval table.
Action determine the color, can switch the green / Red 2 kinds of color display.
Measurement of wide range of pulse interval time.
Measuring, calculating and displaying the pulse interval between 2 points.
Pulse interval measurement range, maximum measurableInput type: NPN/ voltage pulse input type.
Event input terminal 5 points (HOLD, RESET, COMPENSATION) is equipped with.
External power supply DC12V80mA.
No output: -.
96 (W) * 48 (H * 95mm) depth.
Power supply voltage: AC100 ~ 240V.
High speed pulse.
Measuring, increasing or decreassing pulse meter H3CR-G Series.
Action determine the color, can switch the green / Red 2 kinds of color display.
The best choice of rotating encoder and all kinds of ON/OFF pulse signal at high speed,
Cumulative pulse input is 50kHz, phase differrence pulse is 25kHz, increase or decrease of pulse is 30kHz H3CR-G Series.
Supports no voltage contact input to 30Hz.
The count value can be converted to any value
...More relevant models >>>>
Last one: OMRON Solid-state Twin Timers H3CR-F8N
next one: OMRON Solid-state Star-delta Timers H3CR-G8L
Related download