OMRON
Home >> Products >> OMRON >> Power/other peripheral devices >> Connection / Save wiring equipment >> I/O relay terminal >> G79-O300C-275-MN | OMRON Connector cable for I/O relay terminal G79-O300C-275-MN

G79-O300C-275-MN | OMRON Connector cable for I/O relay terminal G79-O300C-275-MN


OMRON G79-O300C-275-MN Product information and technical parameters:
Brand: OMRON
Name: Connector cable for I/O relay terminal
Model: G79-O300C-275-MN
MITSUBISHI motor produced PLC connection cable.
Size: A, 3000mm; B, 1750mm.
Output use.
Cable and loose wire cable with loose wire pressing connecting terminal,
Connector cable, MITSUBISHI motor produced PLC connection cable.

Time specification: Inverse type.
Current setting range: 8 to 26 A.
Operating voltage: 200/220/240 VAC.
Resetting method: Automatic (See note.).
Solid-state Relay Enables Choice of Three.
Operating Functions (Overcurrent, Open,
phase, and Reverse-phase).
Protects 3-phase induction motors and their loads from damage OMRON G79-O300C-275-MN.
Selection and combination of operating functions from overcur,
rent, open-phase, and reverse-phase G79-O300C-275-MN
Circuit and output relay operation can be checked by just operat,
ing the test button.
The set time value can be checked easily because operation time,
is indicated from the start of operation.
Space-saving, integrated construction.
Note: If the K2CM is used with an inverter, the operating conditions will,
depend on the load wiring length, inverter carrier frequency, basic,
frequency, and load conditions OMRON G79-O300C-275-MN. Error will occur in the operating,
values of the overload elements. It is recommended to test operation,
before using the K2CM. Cable: PUR.
Cable core number (core): 3.
Cable outside diameter: 4.3mm.
Cable outlet direction: L type.
Cable length L:5m.
The province, province hours maintenance, use waterproof connector environment and strong tolerance of FA OMRON G79-O300C-275-MN.
Conform to IP67.
FA small special connector flame retardant 94V-0.
The connector wiring system, convenient equipment maintenance,
Reduce equipment downtime.
IEC61076-2-101 (IEC60947-5-2).
For LED products, can clearly confirm the status of the sensor action.
Power ratings: 100 W.
Output voltage: 24 V.
Output current: 4.3 A.
Boost current: 8.6 A.
Newly Released High-capacity 240-W Models in S8EX-series Lineup.
Rated Output of 300 W for 200 VAC.
From 170 to 264 VAC.
New 240-W Models.
Lineup of models with 24-, 36-, and 48-VDC output.
voltages.
15-W, 35-W, 50-W, 100-W, and 150-W Models.
Lineup of models with from 5 to 48-VDC output.
voltages.
All Models.
Approved standaards:
UL60950-1, cUR CSA C22 G79-O300C-275-MN. 2 No. 60950-1, EN 50178,
and EN 60950-1.
Lineup includes open-frame models, models with.
chassis, and models with chassis and covers.
Wide-range power supply: 100 to 240 VAC.
Complies with harmonicc current standard in EN G79-O300C-275-MN.
61000-3-2 (50-W to 240-W models).
The top class in industry for compact size.
Boost current output (some models excluded).


...More relevant models >>>>
Related download