EE-SX975-C1 | OMRON Slot-type Photomicrosensor EE-SX975-C1

EE-SX975-C1 Introduce | EE-SX975-C1 Catalog / Manual / Instructions / Software download

OMRON EE-SX975-C1 Manual And Instructions
EE-SX975-C1 datasheetPDF datasheet
EE-SX975-C1 INSTRUCTION sheet

OMRON EE-SX975-C1 Product information and technical parameters：
Brand: OMRON
Name: Slot-type Photomicrosensor
Model: EE-SX975-C1
Appearance: T-shaped, slot center 10 mm.
Sensing method: Through beam type (with slot).
Connecting method: Connector model (4 poles).
Sensing distance: 5 mm (slot width).
Operating mode: Dark-ON/Light-ON (2 outputs).
Indicator mode: Incident light.
Model: NPN output.
Built-in connector enables,
downsizing and easier connection.
Protective circuit for safe operation.
A built-in connector minimizes the shape and dimensional,
requirements.
Two outputs: light-ON and dark-ON.
Complete lineup including seven different shapes.
Safer operation with built-in power supply reverse polarity,
protection.
Output overcurrent protection with a thermal shutdown,
circuit (patent pending).
The indicator can be seen from many directions to enable,
installation in more locations.
Connector with lock that mates with commercially available,
connectors.

Appearance: Shielded, M30.
Sensing distance: 10 mm.
Output: NPN.
Model: Operation mode NC.
Aluminum and Iron Both.
Detectable from Long Distances. Appearance: 3 dia.
Sensing distance: 2 mm.
Connecting method: Pre-wired Models (2 m).
Cable specifications: PVC (oil-resistant).
Operation mode: NO OMRON EE-SX975-C1.
Wire color /pin arrangement: Brown: +V, Black: Output, Blue: 0 V.
Model: NPN output EE-SX975-C1
Ultra small size, but surprisingly easy installation!
With the addition of M4, 5.4-dia., 6.5-dia. size, unshielded,
pre-wired connector model, and connector model, a total of,
108 model variations are available.
High-speed response frequency stably detects moving,
objects: 5 kHz max.
Four indicator lamps for easier indicator positioning OMRON EE-SX975-C1.
Special mounting brackets reduce time and efforts for,
installation.
Protective Stainless-steel Spiral Tube against wire,
breakage is available (M4, M5 only).
Models also available with standard cables that are 5 m long,
or with robot (bending-resistant) cables. Type: High-speed response models.
Connecting method: Wire-saving connector *1.
Model: NPN output OMRON EE-SX975-C1.
Applicable wire-saving connector(sold separately):
Type,Master connector, Slave connector; Model, E3X-CN21, E3X-CN22.
Stable Detection with Advanced Fiber.
Amplifier Units.
A wide range of added value with standard models with one,
input and two outputs, and ultra-long-term APC models with an,
APC life of approximately 20 years.
Power turning to easily set the optimum light level.
Automatic Power Control (APC) is always enabled to stabilize,
emitter power with high accuracy.
GIGA RAY for stable detection with the highest level of power in,
this class even for low-reflective objects and large objects.
The E3X-DA0-S supports an EtherCAT Sensor Communications,
Unit or CompoNet Sensor Communications Unit. Sensing method: Through beam.
Connection method (cable length): Pre-wired connector (2 m)) EE-SX975-C1.
Sensing distance: 3m.
Beams: Gap, 25 mm; Qty, 5.
Sensingwidth: 100 mm.
External indicator: Possible.
Compact, Resistant to Mutual.
Interference, and Ideal for Picking a Variety of Parts.
Mounts to a parts rack and uses indicatoors to show parts,
picking procedures EE-SX975-C1. Functions as a mistake-proofing Sensor.
Use either the built-in LED indicators or external picking indicators.

...More relevant models >>>>