OMRON
Home >> Products >> OMRON >> Sensor >> micro photoelectric sensor >> Groove type photoelectric sensor >> EE-SX970P-C1 | OMRON Slot-type Photomicrosensor EE-SX970P-C1

EE-SX970P-C1 | OMRON Slot-type Photomicrosensor EE-SX970P-C1

OMRON EE-SX970P-C1 Manual And Instructions
EE-SX970P-C1 datasheetPDF datasheet
EE-SX970P-C1 INSTRUCTION sheet

OMRON EE-SX970P-C1 Product information and technical parameters:
Brand: OMRON
Name: Slot-type Photomicrosensor
Model: EE-SX970P-C1
Appearance: Standard.
Sensing method: Through beam type (with slot).
Connecting method: Connector model (4 poles).
Sensing distance: 5 mm (slot width).
Operating mode: Dark-ON/Light-ON (2 outputs).
Indicator mode: Incident light.
Model: PNP output.
Built-in connector enables,
downsizing and easier connection.
Protective circuit for safe operation.
A built-in connector minimizes the shape and dimensional,
requirements.
Two outputs: light-ON and dark-ON.
Complete lineup including seven different shapes.
Safer operation with built-in power supply reverse polarity,
protection.
Output overcurrent protection with a thermal shutdown,
circuit (patent pending).
The indicator can be seen from many directions to enable,
installation in more locations.
Connector with lock that mates with commercially available,
connectors.

Appearance: Shielded, M18.
Sensing distance: 4 mm.
Output configuration: DC 3-wire, NPN.
Model: Operation mode, NO.
Chip-immune Inductive.
Proximity Sensor.
Correct operation even with aluminum or iron chips sticking,
to the Sensor.
Only the sensing object is detected.
Pre-wired Smartclick Connector Models also available OMRON EE-SX970P-C1. Sensor type: Retro-reflective with MSR function EE-SX970P-C1
Sensing distance: 0.1 to 4 m with E39-R1S.
Connection method: M12 connector.
Model: PNP output.
A new generation in sensing performance.
Simplicity.
Simple selection.
Simple installation.
One family for all.
All standard applications covered.
A wide variety of models.
Models designed for special applications OMRON EE-SX970P-C1.
Non-stop detection.
High quality and reliability.
High EMC protection.
High light immunity.
Robust and waterproof housing. E32-T25XR type: standard type; soft (new standard),
Specialty: flat shape (small),
Shape / detection distance (mm): 160; 130; 75 (30),
Standard test object
(minimum test object) (mm) 1: 0.5 (0.005),
Fiber element for meeting diversified needsSize: M18, Non-shielded OMRON EE-SX970P-C1.
Sensing distance: 16.0 mm.
Connection: M12 connector.
Body material: Brass.
Thread length (overall length): 39 (53).
Output configuration: NPN.
Operation mode NC.
Safe Mounting with Greater.
Sensing Distance.
Ensures a sensing distance approximately 1.5 to 2,
times larger than that of any conventional OMRON Sensor.
Problems such as the collision of workpieces are eliminated.
Full range of standard sizes (M8, M12, M18 and,
M30; both long and short barrels).
Modular construction simplifies customization. Model: Shielded, M30.
Sensing distance: 10 mm.
Output configuration: DC 3-wire, NPN.
Model: Operation mode, NC.
Proximity Sensor with Resin Case,

with Superb Water Resistance EE-SX970P-C1.
IP68 protection.
Mutual interference prevention with models with different,
frequencies is also available. Sensing method: Diffuse-reflective Sensors.
Appearance: Horizontal.
Connection method: Connecctor (M12) EE-SX970P-C1.
Sensing distance: 100 mm (wide view).
Functions: --.
Model: PNP output.
Ordering Information.
Built-in Amplifier Photoelectric Sensors.


...More relevant models >>>>