EE-SPY801 | OMRON Wafer-carrier Mounting Photomicrosensors EE-SPY801

EE-SPY801 Introduce | EE-SPY801 Catalog / Manual / Instructions / Software download

OMRON EE-SPY801 Manual And Instructions
EE-SPY801 datasheetPDF datasheet
EE-SPY801 INSTRUCTION sheet

OMRON EE-SPY801 Product information and technical parameters：
Brand: OMRON
Name: Wafer-carrier Mounting Photomicrosensors
Model: EE-SPY801
Sensing method: Reflective type.
Sensing distance: 0 to 3 mm.
Output configuration: Turns ON when wafer carrier is present.
Cable length: 2 m.
Photomicrosensors for detecting,
wafer-carrier mounting.
The mounting position is set with a pedestal.
The contact surface with the wafer carrier uses a special chemical,
resistant fluororesin.
The unique optical system enables stable detection of almost all,
wafer-carriers.
Light modulation effectively reduces external light interference.
Utilizes talc-free clean cables.

Power supply: DC.
Output type: NPN.
For the most recent information on models that have been,
certified for safety standards, refer to your OMRON website. Pressure range: 0 to 5.00 kPa.
Digital output: NPN open collector.
Linear output: 4 to 20 mA.
Micropressure Sensor with.
Easy-to-Read Digital Display OMRON EE-SPY801.
Repeat accuracy of ±1% FS (setting resolution: 0.01 kPa),
high-precision pressure control available EE-SPY801
Compact design (31 × 30 × 30 mm) saves mounting space.
Easy-to-read red LED indicator.
Analog current output models available (E8Y-A@Y).
Pressure port Rc (PT) 1/8 models available (-R).
EN and UL approved. Size: M18, Shielded.
Sensing distance: 8.0 mm.
Connection: Pre-wired OMRON EE-SPY801.
Body material: Brass.
Thread length (overall length): 61 (81).
Output configuration: NPN.
Operation mode NO.
Safe Mounting with Greater.
Sensing Distance.
Ensures a sensing distance approximately 1.5 to 2,
times larger than that of any conventional OMRON Sensor.
Problems such as the collision of workpieces are eliminated.
Full range of standard sizes (M8, M12, M18 and,
M30; both long and short barrels) OMRON EE-SPY801.
Modular construction simplifies customization. E3JK-D61 diffuse reflection type,
E3JK direct current mode: mode; shading ON,
Miniature amplifier built-in type photoelectric switchE3F3-D31 detection method: diffuse reflection type,
Wire lead out type,
Type: Plastic appearance; PNP output,
Threaded cylindrical photoelectric sensor, built-in amplifier,
Photoelectric sensor with proximity sensor appearance
High anti interference with optoelectronic -IC technologyModel: Shielded, M8.
Sensing distance: 1.5 mm.
Output configuration: AC 2-wire.
Model: Operation mode, NO.
Proximitty Sensor with Resin Case,
with Superb Water Resistance EE-SPY801.
IP68 protection.
Mutual interference prevention with models with different,
frequencies is also available. Size: M12 (Brass); Single; Shielded.
Sensing distance: 10 mm.
Connectting method (See note 1 EE-SPY801. ): M12 Connector.
Body length: Long.
Output configuration: PNP.
Operation mode NC.
A new generation in global applications.

...More relevant models >>>>