Home
>> Products
>> OMRON
>> Sensor
>> rotary encoder
>> Absolute encoder
>> E6C3-AG5C-C | OMRON Slim Encoder with Diameter of 50 mm E6C3-AG5C-C
E6C3-AG5C-C | OMRON Slim Encoder with Diameter of 50 mm E6C3-AG5C-C
OMRON E6C3-AG5C-C Manual And Instructions
E6C3-AG5C-C datasheetPDF datasheet
E6C3-AG5C-C INSTRUCTION sheet
OMRON E6C3-AG5C-C Product information and technical parameters：
Brand: OMRON
Name: Slim Encoder with Diameter of 50 mm
Model: E6C3-AG5C-C
Power supply voltage: 12 to 24 VDC.
Output configuration: Open-collector output (NPN).
Output code: Gray.
Resolution (divisions): 256, 360, (720) *2).
Connection method: Pre-wired Connector Model (1 m).
Rugged Rotary Encoder.
Absolute model.
External diameter of 50 mm.
Resolution of up to 1,024 (10-bit).
IP65 (improved oil-proof protection with sealed bearings).
Optimum angle control possible in combination with PLC or,
Cam Positioner.
...More relevant models >>>>
E6C3-AG5C-C datasheetPDF datasheet
E6C3-AG5C-C INSTRUCTION sheet
OMRON E6C3-AG5C-C Product information and technical parameters：
Brand: OMRON
Name: Slim Encoder with Diameter of 50 mm
Model: E6C3-AG5C-C
Power supply voltage: 12 to 24 VDC.
Output configuration: Open-collector output (NPN).
Output code: Gray.
Resolution (divisions): 256, 360, (720) *2).
Connection method: Pre-wired Connector Model (1 m).
Rugged Rotary Encoder.
Absolute model.
External diameter of 50 mm.
Resolution of up to 1,024 (10-bit).
IP65 (improved oil-proof protection with sealed bearings).
Optimum angle control possible in combination with PLC or,
Cam Positioner.
Type: Standard models.
Connecting method: Wire-saving connector *1.
Model: NPN output.
Applicable wire-saving connector(sold separately):
Type,Master connector, Slave connector; Model, E3X-CN21, E3X-CN22.
Stable Detection with Advanced Fiber.
Amplifier Units.
A wide range of added value with standard models with one,
input and two outputs, and ultra-long-term APC models with an,
APC life of approximately 20 years OMRON E6C3-AG5C-C E6C3-AG5C-C
Power turning to easily set the optimum light level.
Automatic Power Control (APC) is always enabled to stabilize,
emitter power with high accuracy.
GIGA RAY for stable detection with the highest level of power in,
this class even for low-reflective objects and large objects OMRON E6C3-AG5C-C.
The E3X-DA0-S supports an EtherCAT Sensor Communications,
Unit or CompoNet Sensor Communications Unit.
Size: M18 (brass), two - fold range, non - shielded type.
Detection range: 16mm.
Connection mode: lead type (cable length is 2M and 5m two).
Thread length: long thread type.
Output type: PNP.
Action mode NC.
Set up the new standard of the world economy proximity sensor.
OMRON as a pioneer and leader in proximity sensor industry,
Now bring you a new E2B proximity sensor with high performance to price ratio OMRON E6C3-AG5C-C.
This series of products are complete,
Aimed at reasonable prices to meet customer demand for high quality and high reliability of the sensor.
We have tested the product not only on the protection level (IP67) specific item,
The oil spray test was carried out on the condition of the work site.
Simulation test was carried out in the environment of high oil mist concentration. Shape: Cylindrical.
Dimensions: 3 dia. x 18 mm.
Sensing distance: 0.5 mm.
Resolution: 1 μm.
High-accuracy Detection of Metal Worrkpiece Displacement E6C3-AG5C-C.
Sensor Heads support a wide variety of applications.
Linearity can be adjusted for non-ferrous metals,
such as SUS and aluminum, using the material selection function.
Simple linearity compensation (teaching).
Easily perform calculation for two Sensors by using a Calculating Unit E6C3-AG5C-C.
Prevent mutual interference for up to five Units by using a Calculating Unit.
Connecting method: Wire-saving connector *1.
Model: NPN output.
Applicable wire-saving connector(sold separately):
Type,Master connector, Slave connector; Model, E3X-CN21, E3X-CN22.
Stable Detection with Advanced Fiber.
Amplifier Units.
A wide range of added value with standard models with one,
input and two outputs, and ultra-long-term APC models with an,
APC life of approximately 20 years OMRON E6C3-AG5C-C E6C3-AG5C-C
Power turning to easily set the optimum light level.
Automatic Power Control (APC) is always enabled to stabilize,
emitter power with high accuracy.
GIGA RAY for stable detection with the highest level of power in,
this class even for low-reflective objects and large objects OMRON E6C3-AG5C-C.
The E3X-DA0-S supports an EtherCAT Sensor Communications,
Unit or CompoNet Sensor Communications Unit.
Size: M18 (brass), two - fold range, non - shielded type.
Detection range: 16mm.
Connection mode: lead type (cable length is 2M and 5m two).
Thread length: long thread type.
Output type: PNP.
Action mode NC.
Set up the new standard of the world economy proximity sensor.
OMRON as a pioneer and leader in proximity sensor industry,
Now bring you a new E2B proximity sensor with high performance to price ratio OMRON E6C3-AG5C-C.
This series of products are complete,
Aimed at reasonable prices to meet customer demand for high quality and high reliability of the sensor.
We have tested the product not only on the protection level (IP67) specific item,
The oil spray test was carried out on the condition of the work site.
Simulation test was carried out in the environment of high oil mist concentration. Shape: Cylindrical.
Dimensions: 3 dia. x 18 mm.
Sensing distance: 0.5 mm.
Resolution: 1 μm.
High-accuracy Detection of Metal Worrkpiece Displacement E6C3-AG5C-C.
Sensor Heads support a wide variety of applications.
Linearity can be adjusted for non-ferrous metals,
such as SUS and aluminum, using the material selection function.
Simple linearity compensation (teaching).
Easily perform calculation for two Sensors by using a Calculating Unit E6C3-AG5C-C.
Prevent mutual interference for up to five Units by using a Calculating Unit.
...More relevant models >>>>
Last one: OMRON Slim Encoder with Diameter of 50 mm E6C3-A Series
next one: OMRON Slim Encoder with Diameter of 50 mm E6C3-AG5C
Related download