Home
>> Products
>> OMRON
>> Sensor
>> Photoelectric sensor
>> photoelectric sensor amplifier built-in
>> E3S-BD11 | OMRON Amplifier built-in type photoelectric switch E3S-BD11
E3S-BD11 | OMRON Amplifier built-in type photoelectric switch E3S-BD11
OMRON E3S-BD11 Manual And Instructions
E3S-BD11 INSTRUCTION sheet
OMRON E3S-BD11 Product information and technical parameters：
Brand: OMRON
Name: Amplifier built-in type photoelectric switch
Model: E3S-BD11
Small, easy to use.
Detection mode: diffuse reflection type.
Shape: horizontal type.
Connection mode: lead wire.
Detection range: red light 200mm.
Output mode: NPN output.
...More relevant models >>>>
E3S-BD11 INSTRUCTION sheet
OMRON E3S-BD11 Product information and technical parameters：
Brand: OMRON
Name: Amplifier built-in type photoelectric switch
Model: E3S-BD11
Small, easy to use.
Detection mode: diffuse reflection type.
Shape: horizontal type.
Connection mode: lead wire.
Detection range: red light 200mm.
Output mode: NPN output.
Appearance: M5.
Sensing distance: 1.2 mm.
Connecting method: M8 Pre-wired Connector Models .
Cable specifications: --.
Operation mode: NC.
Wire color /pin arrangement: 1: +V, 3: 0 V, 4: Control output.
Model: NPN output.
Ultra small size, but surprisingly easy installation!
With the addition of M4, 5 OMRON E3S-BD11. 4-dia., 6.5-dia. size, unshielded,
pre-wired connector model, and connector model, a total of,
108 model variations are available E3S-BD11
High-speed response frequency stably detects moving,
objects: 5 kHz max.
Four indicator lamps for easier indicator positioning.
Special mounting brackets reduce time and efforts for,
installation.
Protective Stainless-steel Spiral Tube against wire,
breakage is available (M4, M5 only) OMRON E3S-BD11.
Models also available with standard cables that are 5 m long,
or with robot (bending-resistant) cables. E32-T25Y type: standard type; standard,
Specialty: plane shape (small) side,
Shape / detection distance (mm): 160; 130; 75 (30),
Bending radius (mm): R10.
Standard test object (minimum test object) (mm) 1: 1 (0.0005),
Fiber element for meeting diversified needsName: Reflectors OMRON E3S-BD11.
Directional angle: 30° min.
Ambient operating temperature range: -25 to 55°C.
Ambient storage temperature range: -40 to 70°C.
Ambient operating humidity range: 35% to 95%.
Ambient storage humidity range: 35% to 95%.
Degree of protection: IEC IP67.
Accessories: --. Appearance: Shielded, M30.
Sensing distance: 10 mm.
Model: Operation mode, NC.
Proximity Sensor with a Long Screw Length.
Increased tightening strength. Cable protectors,
provided as a standard feature.
Increased indicator visibility.
A milled section for wrench grip on all models.Appearance: Shielded, M18.
Sensing distance: 5 mm.
Output: PNP.
Model: Operation mode NO.
Aluminum and Iron Both.
Detectable from Long Distancces E3S-BD11. Connection method: Pre-wired.
Cable length: 2 m.
Sensing distance: 300 ± 150 mm.
Model: NPN output.
A CMOS Laser Sensor That’s.
Optimum for Simple Measurements.
A resolution of 0.002 mm that’s suitable for simple measure ments.
Stable measurements for any type of workpiece E3S-BD11.
Models available with four different distance specifications.
Long-distance model for up to 1,000 mm.
Sensing distance: 1.2 mm.
Connecting method: M8 Pre-wired Connector Models .
Cable specifications: --.
Operation mode: NC.
Wire color /pin arrangement: 1: +V, 3: 0 V, 4: Control output.
Model: NPN output.
Ultra small size, but surprisingly easy installation!
With the addition of M4, 5 OMRON E3S-BD11. 4-dia., 6.5-dia. size, unshielded,
pre-wired connector model, and connector model, a total of,
108 model variations are available E3S-BD11
High-speed response frequency stably detects moving,
objects: 5 kHz max.
Four indicator lamps for easier indicator positioning.
Special mounting brackets reduce time and efforts for,
installation.
Protective Stainless-steel Spiral Tube against wire,
breakage is available (M4, M5 only) OMRON E3S-BD11.
Models also available with standard cables that are 5 m long,
or with robot (bending-resistant) cables. E32-T25Y type: standard type; standard,
Specialty: plane shape (small) side,
Shape / detection distance (mm): 160; 130; 75 (30),
Bending radius (mm): R10.
Standard test object (minimum test object) (mm) 1: 1 (0.0005),
Fiber element for meeting diversified needsName: Reflectors OMRON E3S-BD11.
Directional angle: 30° min.
Ambient operating temperature range: -25 to 55°C.
Ambient storage temperature range: -40 to 70°C.
Ambient operating humidity range: 35% to 95%.
Ambient storage humidity range: 35% to 95%.
Degree of protection: IEC IP67.
Accessories: --. Appearance: Shielded, M30.
Sensing distance: 10 mm.
Model: Operation mode, NC.
Proximity Sensor with a Long Screw Length.
Increased tightening strength. Cable protectors,
provided as a standard feature.
Increased indicator visibility.
A milled section for wrench grip on all models.Appearance: Shielded, M18.
Sensing distance: 5 mm.
Output: PNP.
Model: Operation mode NO.
Aluminum and Iron Both.
Detectable from Long Distancces E3S-BD11. Connection method: Pre-wired.
Cable length: 2 m.
Sensing distance: 300 ± 150 mm.
Model: NPN output.
A CMOS Laser Sensor That’s.
Optimum for Simple Measurements.
A resolution of 0.002 mm that’s suitable for simple measure ments.
Stable measurements for any type of workpiece E3S-BD11.
Models available with four different distance specifications.
Long-distance model for up to 1,000 mm.
...More relevant models >>>>
Last one: OMRON Amplifier built-in type photoelectric switch E3S-BR81
next one: OMRON Amplifier built-in type photoelectric switch E3S-BD31
Related download