OMRON
Home >> Products >> OMRON >> Sensor >> Proximity sensor >> Electrostatic capacity type proximity sensor >> E2K-X4ME2 2M | OMRON Cylindrical Proximity Sensor E2K-X4ME2 2M

E2K-X4ME2 2M | OMRON Cylindrical Proximity Sensor E2K-X4ME2 2M

OMRON E2K-X4ME2 2M Manual And Instructions
E2K-X4ME2 2M datasheetPDF datasheet

OMRON E2K-X4ME2 2M Product information and technical parameters:
Brand: OMRON
Name: Cylindrical Proximity Sensor
Model: E2K-X4ME2 2M
Appearance: Unshielded, M12.
Sensing distance: 4 mm.
Output configuration: DC 3-wire, NPN.
Model: Operation mode, NC.
General-purpose Threaded.
Capacitive Sensor.
Product lineup with M12, M18, and M30 models.
Fixed sensing distance requires no sensitivity adjustment.

E32-T24R type: standard type; soft (new standard),
Features: with 1 cylinder side (small),
Shape / detection distance (mm): 60; 50; 25 (10),
Standard test object
(minimum test object) (mm) 1: 0.5 (0.005),
Fiber element for meeting diversified needsOptical system: diffuse type.
Detection distance: 350 positive and negative 135mm OMRON E2K-X4ME2 2M.
Beam shape: point beam.
Beam diameter: diameter of 240 M E2K-X4ME2 2M
Resolution: 20 m.
Cable length: 0.5m. Name: Special Reflector for E3ZM-B.
Directional angle: 30° min.
Ambient operating temperature range: -25 to 55°C.
Ambient storage temperature range: 0 to 40°C.
Ambient operating humidity range: 35% to 85%.
Ambient storage humidity range: 35% to 85%.
Degree of protection: -- OMRON E2K-X4ME2 2M.
Accessories: Phillips screws M3 × 8, spring washers M3, nuts M3. Pressure range: Positive pressure; 0 to 1 MPa.
ON/OFF output: Open collector (two independent outputs).
Linear output: 1 to 5 V.
Model: PNP output.
Pressure Sensor with.
Easy-to-Read LED Display.
Pressure status can be checked at a glance from the,
digital display and bar display.
Measurement pressure prevents incorrect outputs due,
to momentary pressure changes OMRON E2K-X4ME2 2M.
Perform automatic teaching simply by teaching pressure,
values for good and bad products.
Industry’s smallest models at just 28 × 28 × 29 mm.
Only in hysteresis mode. Stable detection of chip components in 0402 dimensions.
Minimum detection object 0.15mm (cube).
Built in small lens, light 7mm wide uniform light.
Even smaller pieces will not be spared.
And, with a response rate of 135 s and other levels of the highest detection performance,
Even the latest 0402 size tiny chips are able to accurately capture.
Ultra small sensor head, can be installed into a small space.
When the electronic component grade sorting and the like are arranged in parallel, it is helpful to the miniaturization of the device.
Adjustable time timer.
Equipped with timer function can be set time.
Controol device to transmit the signal to the back section E2K-X4ME2 2M.
In addition, due to the built-in counter function, therefore, you can also set the number of output signals.
Automatic compensation detecting state
Equipped with dust and dirt detecttion according to the amount of light to change light automatic compensation function E2K-X4ME2 2M.
Always maintain the detection performance in the best condition.


...More relevant models >>>>