Home
>> Products
>> OMRON
>> Sensor
>> Proximity sensor
>> Cylindrical proximity sensor
>> E2EQ-X15X1 2M | OMRON Spatter-resistant Proximity Sensor E2EQ-X15X1 2M
E2EQ-X15X1 2M | OMRON Spatter-resistant Proximity Sensor E2EQ-X15X1 2M
OMRON E2EQ-X15X1 2M Manual And Instructions
E2EQ-X15X1 2M datasheetPDF datasheet
OMRON E2EQ-X15X1 2M Product information and technical parameters：
Brand: OMRON
Name: Spatter-resistant Proximity Sensor
Model: E2EQ-X15X1 2M
Appearance: Shielded, M30.
Sensing distance: 15 mm.
Output configuration: DC 2-wire (no polarity).
Operation mode: NO.
Spatter-resistant Fluororesin,
coated Proximity Sensor.
Superior spatter resistance.
Long Sensing-distance Models added for sensing,
distances up to 15 mm.
Pre-wired Smartclick Connector Models are also available.
...More relevant models >>>>
E2EQ-X15X1 2M datasheetPDF datasheet
OMRON E2EQ-X15X1 2M Product information and technical parameters：
Brand: OMRON
Name: Spatter-resistant Proximity Sensor
Model: E2EQ-X15X1 2M
Appearance: Shielded, M30.
Sensing distance: 15 mm.
Output configuration: DC 2-wire (no polarity).
Operation mode: NO.
Spatter-resistant Fluororesin,
coated Proximity Sensor.
Superior spatter resistance.
Long Sensing-distance Models added for sensing,
distances up to 15 mm.
Pre-wired Smartclick Connector Models are also available.
Appearance: Close mounting.
Sensing method: Throughbeam type(with slot).
Connecting method: Connector(4 poles).
Sensing distance: 5 mm (slot width).
Output configuration: Dark-ON/Light-ON (selectable).
Indicator mode: Incident light.
Model: NPN output.
Global Standard Slot-type.
photomicrosensors with 50- to,
100-mA direct switching capacity OMRON E2EQ-X15X1 2M.
Series includes models that enable switching between,
dark-ON and light-ON operation E2EQ-X15X1 2M
Response frequency as high as 1 kHz.
Easy operation monitoring with bright light indicator.
Wide operating voltage range: 5 to 24 VDC.
Models in which the light indicator turns ON for dark-ON,
operation are also available.
A wide range of variations in eight different shapes OMRON E2EQ-X15X1 2M.
Flexible robot cable is provided as a standard feature. Size: M8(Stainless steel)(See note 2.); Single; Shielded.
Sensing distance: 1.5 mm.
Connecting method (See note 1.): Pre-wired.
Body length: Long.
Output configuration: PNP.
Operation mode NC.
A new generation in global applications. Classification: Stationary Unit.
Appearance: M30. 8±1.5 mm, Stationary Unit, Moving Unit OMRON E2EQ-X15X1 2M.
Transmission distance (couplers): Typical: 19.2 ms, Max: 31 ms.
I/O transmission delay time:
Transmits Input Device ON/OFF.
Signals and Power.
The Key to Effortless Wiring for.
Rotating and Moving Bodies. Type: Ultra-long-term APC models.
Connecting method: Wire-saving connector *1.
Model: PNP output.
Applicable wire-saving connector(sold separately):
Type,Master connector, Slave connector; Model, E3X-CN21, E3X-CN22.
Stable Detection with Advanced Fiber.
Amplifier Units.
A wide range of added value with standard models with one,
input and two outputs, and ultra-long-term APC models with an,
APC life of approximately 20 years.
PPower turning to easily set the optimum light level E2EQ-X15X1 2M.
Automatic Power Control (APC) is always enabled to stabilize,
emitter power with high accuracy.
GIGA RAY for stable detection with the highest level of power in,
this class even for low-reflective objects and large objects E2EQ-X15X1 2M.
The E3X-DA0-S supports an EtherCAT Sensor Communications,
Unit or CompoNet Sensor Communications Unit.
Sensing method: Throughbeam type(with slot).
Connecting method: Connector(4 poles).
Sensing distance: 5 mm (slot width).
Output configuration: Dark-ON/Light-ON (selectable).
Indicator mode: Incident light.
Model: NPN output.
Global Standard Slot-type.
photomicrosensors with 50- to,
100-mA direct switching capacity OMRON E2EQ-X15X1 2M.
Series includes models that enable switching between,
dark-ON and light-ON operation E2EQ-X15X1 2M
Response frequency as high as 1 kHz.
Easy operation monitoring with bright light indicator.
Wide operating voltage range: 5 to 24 VDC.
Models in which the light indicator turns ON for dark-ON,
operation are also available.
A wide range of variations in eight different shapes OMRON E2EQ-X15X1 2M.
Flexible robot cable is provided as a standard feature. Size: M8(Stainless steel)(See note 2.); Single; Shielded.
Sensing distance: 1.5 mm.
Connecting method (See note 1.): Pre-wired.
Body length: Long.
Output configuration: PNP.
Operation mode NC.
A new generation in global applications. Classification: Stationary Unit.
Appearance: M30. 8±1.5 mm, Stationary Unit, Moving Unit OMRON E2EQ-X15X1 2M.
Transmission distance (couplers): Typical: 19.2 ms, Max: 31 ms.
I/O transmission delay time:
Transmits Input Device ON/OFF.
Signals and Power.
The Key to Effortless Wiring for.
Rotating and Moving Bodies. Type: Ultra-long-term APC models.
Connecting method: Wire-saving connector *1.
Model: PNP output.
Applicable wire-saving connector(sold separately):
Type,Master connector, Slave connector; Model, E3X-CN21, E3X-CN22.
Stable Detection with Advanced Fiber.
Amplifier Units.
A wide range of added value with standard models with one,
input and two outputs, and ultra-long-term APC models with an,
APC life of approximately 20 years.
PPower turning to easily set the optimum light level E2EQ-X15X1 2M.
Automatic Power Control (APC) is always enabled to stabilize,
emitter power with high accuracy.
GIGA RAY for stable detection with the highest level of power in,
this class even for low-reflective objects and large objects E2EQ-X15X1 2M.
The E3X-DA0-S supports an EtherCAT Sensor Communications,
Unit or CompoNet Sensor Communications Unit.
...More relevant models >>>>
Last one: OMRON Spatter-resistant Proximity Sensor E2EQ-X8X1 2M
next one: OMRON Spatter-resistant Proximity Sensor E2EQ-X3D1 2M
Related download