C500-ASC01 | OMRON ASCII Unit C500-ASC01

C500-OC I/O Unit Transistor Output 16 pts C500-OC223(3G2A5-OC223).
AC250/DC24V 2A.Model : C500-BP001.
Optional extension cable is necessary..Model : CV500-CN332.
Cable I / O connection.
30M cable length.Model : CVM1-DRM21-V1.
CVM1/CV series for.Model: C500F-CPUA1(3G2C3-CPUA1).
C500F-CP CPU Programmable Controller C500F-CPUA1 OMRON C500-ASC01. Model : CV500-CN228.
BASIC for connecting the unit ← → FIT10 (2m) C500-ASC01C500-RM SYSMAC BUS Remote I/O Master Wired C500-RM001-V1.
PCF.Supply voltage: 100 to 120 or 200 to 240 VAC, 50/60 Hz
Output capacity: DC5V, 6.5AC500-AS Special I/O Unit ASCII Unit C500-ASC04.Model : CV2000-CPU01-EV1.
SFC / Ladder 2, 048 (with RAM62K words, the top internal link).Model: C500-BC082(3G2A5-BC082) OMRON C500-ASC01.
8 slots(5 linkable slots).
Protector for CPU Rack IOC or Expansion CPU Rack IOIF connector CV500-COV03Model : CVM1D-BI102.
10-slot.Model: C500-CN531.
Cable length: 50 m.
Programming Console Connecting Cable.
For extension and connection of FIT of FIT.
C500-ID I/O Unit Interrupt Input Module 8 pts C500-ID216(3G2A5-ID216).
DC12-24V 13mA.I/O Terminal Cover For 20-pin block, standard C500-COV13Model: C500-CN222N OMRON C500-ASC01.
Cable length 2m.
CV Series C Series Expansion ← → I / O device CPU Connecting cable(Vertical-wired)C500-AD/3G2A5-AD Special I/O Unit Analog Input C500-AD004(3G2A5-AD004).
Input: 2 pts.
Specification: -10~+10V.C500-IA I/O Unit AC Input 32 pts C500-IA223(3G2A5-IA223).
AC200-240V 10mA.C500-NC Special I/O Unit C/CV Servo Module Single Axis Stepper C500-NC111-V1.Model : C500-LK201-EV1.
RS-232C/RS-422.Model : C500-AP003.
Necessary for Handheld Programming Console.C500-RT SYSMAC BUS Remote I/O Master Slave Wired C500-RT001-V1.
PCF.With the optical connector 1Supply voltage: 100 to 120 or 200 to 240 VAC (automatic voltage setting), 50/60 Hz
Operating voltage range: 85 to 132 or 170 to 264 VAC
Power consumption: 200 VA max.
Output capacity: 12 A, 5 VDCThe initial configuration of the G language unit in the industry due to the use of G language,
Complex processing procedures do not need to be able to make the ladder diagram.
The realization of the first 1 axis simultaneous control of 4 axis simultaneous control in the industry is due to the multi task function,
Can be executed at the same time or the 2 axis simultaneous control of 4 axes, and then can achieve the 4 axis independent control, etc.
Up to 8 units can be installed CVM1 8 units can be installed 1 units, can control up to 32 axes.
Applicable to ABS encoder by standard,
Applicable to the ABS type (absolute output) encoder, so after the emergency stop, no need to search for the origin, etc C500-ASC01. .
S curve also according to the standard configuration plus deceleration curve, in addition to the trapezoidal outside,
Also configured too suppress the mechanical vibration of the S shape curve C500-ASC01.
Program login maximum of up to 100
G language can be programmed with the MC support software G