C200H-MD501 | OMRON TTL I/O Module C200H-MD501

Model: C200H-PS211.
Supply voltage: 24VDC.ASCII Unit
This program runs independently from the ladder-diagram program in the PLC.

Name: ASCII Module.
Model: C200H-ASC21.
Communications port>Port 1: RS-232C(peripheral device or termi-nal connection).
Communications port>Port 2: RS-422A/485(peripheral Model: C200H-OD21B OMRON C200H-MD501.
No. of points: 32 pts.
Specifications: 24 VDC, 0.5 A (5A/Unit) C200H-MD501
Weight: 180g max.Model: C200H-ID217.
No. of points: 32 pts.
Specifications: 24 VDC.
Weight: 250g max.Name: Position Control Module.
Model: C200HW-NC213.
Control method: Open-loop, automatic trapezoid acceleration/deceleration.
Control output sig-nals: Pulse-train outputs.
Controlled axes: 2.Model: C200H-IM211.
No OMRON C200H-MD501. of inputs: 8 pts.
Input voltage: 12 to 24 VAC/DC, +10%/–15%.
Input current: 10mA, 24VDC.
Isolation: Photo-coupler.
Indica-tor: LED.
External connec-tions: Remove-able termi-nal blocks.
Inputs percom-mon: 8 pts.
Internal currentcon-sump-tion: 100 to 120/200 to 240 VAC (switchable), Wired.1 set (2 included).24 VDC, Wired.Name: Remote I/O Master.
Model: C200HW-SRM21-V1.ASCII Unit
This program runs independently from the ladder-diagram program in the PLC OMRON C200H-MD501.

Name: ASCII Module.
Model: C200H-ASC11.
Communications port>Port 1: RS-232C(peripheral device or termi-nal connection).
Communications port>Port 2: RS-232C(peripheral deviName: Position Control Module.
Model: C200HW-NC113.
Control method: Open-loop, automatic trapezoid acceleration/deceleration.
Control output sig-nals: Pulse-train outputs.
Controlled axes: 1.C200H-CPU01-E/C200H-CPU03-E CPUs
High Spec, Small Rack Style, OEM Version
The C200H-CPU01-E and C200H-CPU03-E controllers offer big machine functions
in a system designed ideally for basic OEM systems from 50 to 480 I/O. A wide
variety of plug-in style I/O modules are available, including intelligent modules.Power supply voltage: DC100V.
Note: operation with output contacts.
Power supply unit.
The power supply of the CPU rack is supplied by the power supply unit.
The following power units are available for selection.
C200HW-PA204 (voltage: AC100-120V/AC200-240V)
C200HW-PA204S (voltage: AC100-120V/AC200-240V)
C200HW-PA204R (voltage: AC100-120V/AC200-240V)
C200HW-PD024 (voltage: DC24V)
In the past, PC connected tto a measurement equipment or components must be given to the ASCII unit or BASIC unit to write a communication program C200H-MD501.
Now, PC C200HX/HG/HE is installed on the communication protocol macro function,
Can be configured to these communicaations procedures through the PMCR instruction to the ladder program,
With this function system can be easily connected with a wide range of components C200H-MD501.