OMRON
Home >> Download >> OMRON >> Manual Download >> OMRON K2CM-2L Manual K2CM-2L Communications Manual

OMRON K2CM-2L Manual K2CM-2L Communications Manual

Brand: OMRON
Product model: K2CM-2L
Name: Digital Temperature Controllers
Sort: Communications Manual
File language: English
File size: 0.29MB
Appearance: square shell embedded F1.
Static type reverse electric relay K2WR type.
Reverse power relay for household and marine generator.
A high precision power detection can be performed by the analog time division multiplier.
Through the rated voltage of the switch, adjust the current simulation of variable,
Can correspond to the rated value of all generators K2CM-2L Communications Manual.
Due to the instant start in contact, the response difference is minimal,
Position detection with high accuracy K2CM-2L Sharing with voltage input, no need to control the power supply.
Because it is static, so the anti vibration impact ability, action stability.
Equipped with easy to manage and maintain the boot display with LED. Rated input: 3-phase 3-wire mode, 3-phase 4-wire mode;
380, 400, 415, 480 VAC, 220, 230, 240, 277 VAC K2CM-2L Communications Manual.
Ideal for Monitoring 3-phase Power.
Supplies for Industrial Facilities and Equipment.
Greater resistance to inverter noise.
Monitor overvoltages and undervoltages for three-phase,
3-wire or 4-wire power supplies.
DIP switch setting for 3-phase 3-wire or 3-phase 4-wire,
power supply.
Two SPDT output relays, 5 A at 250 VAC (resistive load) K2CM-2L Communications Manual.
Separate outputs possible for overvoltages and,
undervoltages.
World-wide power specifications supported by one Unit,
(switchable using DIP switch).
Relay status can be monitored using LED indicator. Input type: NPN/ voltage pulse input type.
Event input terminal 5 points (HOLD, RESET, COMPENSATION) is equipped with.
External power supply DC12V80mA.
Linear: current; NPN open collector (OUT5, OUT4, OUT3, OUT2, OUT1).
96 (W) * 48 (H * 95mm) depth.
Power supply voltage: AC/DC24V.
High speed pulse.
Measuring, increasing or decreasing pulse meter.
Action determine the color, can switch the green / Red 2 kinds of color display.
The best choice of rotating encoder and all kinds of ON/OFF pulse signal at high speed,
The cumulative pulse input is 50kHz, the phase difference pulse is 25kHz, and the increase or decrease of pulse is 3Input type: Platinum-resistance thermometer or thermocouple.
Supply voltage: 24 VAC/VDC.
Output: 1 relay contact output (SPDT).
Highly Visible LCD Display with 2-color (Red and Green) LEDs.
Wide input range - select from two types of platinum-resistance,
thermometers and ten types of thermocouples.
Front-panel key operation for easy setting.
Average processing function suppresses flicker.
Temperature input shift and temperaturre unit selection functions K2CM-2L Manual.
Easy confirmation of max/min display.
Short 80-mm depth (measured from edge of face plate).
Finger protective cover (standard equipment) protects against,
electric shock.
Water- and dust-proof NEMA4XX (IP66 equivalent) front panel K2CM-2L Manual.
Recognized to conform to U.S. and Canadian requirements under,
the Component Recognition Program of UL.
CE marking.
Related products
OMRON
Motor Protective Relay
K2CM-1LS
OMRON Motor Protective Relay K2CM-1LS
Time specification: Inverse type. Current set
OMRON
Motor Protective Relay
K2CM-4M
OMRON Motor Protective Relay K2CM-4M
Time specification: Inverse type. Current set
OMRON
Heater Element Burnout Detector
K2CU-P1-B
OMRON Heater Element Burnout Detector K2CU-P1-B
Control supply voltage: 110/220 VAC Without
OMRON
Motor Protective Relay
K2CM-4LA
OMRON Motor Protective Relay K2CM-4LA
Time specification: Inverse type. Current set