OMRON CP1L-EM40DT-D Manual CP1L-EM40DT-D REFERENCE MANUAL

I/O bits: 5, 120 (Expan-sion Racks: 7).
Program capacity: 120K steps.
Data memory capacity: 256K words (DM: 32K words, EM: 32K words ×7 banks)CPU Unit: CP1L-L CPU Units with 10 Point.
Specifications: CPU type, Memory capacity: 5K steps
High-speed counters: 100 kHz, 4 axes Pulse outputs:
100 kHz, 2 axes (Models with transistor outputs only);
Power supply, AC power supply; Output method, Transistor output (sinking);
Inputs, 6; Output, 4 CP1L-EM40DT-D REFERENCE MANUAL CP1L-EM40DT-D
Standards: UC1, N, L, CE.
High Performing Programmable Controller with Embedded Ethernet.
"CP1L-EM" and "CP1L-EL" has a standard-feature Ethernet port.
"CP1L-M" and "CP1L-L" has a standard-feature peripheral USB port.
Function blocks (FB) allow you to build up modular structure and,
programming of ladder diagrams CP1L-EM40DT-D REFERENCE MANUAL. C500-OD I/O Unit Transistor Output 32 pts C500-OD218.
DC12～24V 0.3A.I/O points: 256 pts.
Program capacity(words): 7.2 K.
DM capacity (words): 6 K.
RS-232C port: YES.
Pulse I/O: YES.SYSMAC NET Link Unit.
A Bus Connection Unit must be ordered separately.
C200HS Communications SYSMAC NET Interface C200HS-SNT32.Model: C200H-MR432 CP1L-EM40DT-D REFERENCE MANUAL.
Description: RAM, 4K words, capacitor back-up.no clock.The initial configuration of the G language unit in the industry due to the use of G language,
Complex processing procedures do not need to be able to make the ladder diagram.
The realization of the first 1 axis simultaneous control of 4 axis simultaneous control in the industry is due to the multi task function,
Can be executed at the same time or the 2 axis simultaneous control of 4 axes, and then can achieve the 4 axis independent control, etc.
Up to 8 units can be installed CVM1 8 units can be installed 1 units, can control up to 32 axes.
Applicable to ABS encoder by standard,
Applicable to the ABS type (absollute output) encoder, so after the emergency stop, no need to search for the origin, etc CP1L-EM40DT-D Manual. .
S curve also according to the standard configuration plus deceleration curve, in addition to the trapezoidal outside,
Also configured too suppress the mechanical vibration of the S shape curve CP1L-EM40DT-D Manual.
Program login maximum of up to 100
G language can be programmed with the MC support software G