OMRON CP1H-XA40DT-D Manual CP1H-XA40DT-D OPERATION MANUAL

Number of inputs: 16 pts.
Input Voltage: 24V DC.
Input Current: 6 mA.Name: e-CON Connectors.
Specifications: Outputs; 32 outputs; PNP;
Without Short-circuit and,
Disconnected Line Detection.
"Easy" and "Flexible" system expansion,
with linked CC-Link and CompoNet.
Branching is easily made with CompoNet CP1H-XA40DT-D OPERATION MANUAL.
Wiring material cost can be reduced.
Bit-level I/O distribution reduces,
wiring in the system CP1H-XA40DT-D
A wide variety of CompoNet Slave Units,
contribute to system size reduction.
Seven-segment Display on the Gateway Unit,
helps to detect errors on site.
The Participation Flags and Communications,
Error Flags can be checked at the Host,
Controller to detect the location and,
content of the error CP1H-XA40DT-D OPERATION MANUAL. Model: C200H-MAD01.
External input points: 2.
External output points: 2.
External input signal range: 1 to 5 V or 0 to 10 V or –10 to 10 V.
External output signal range: 1 to 5 V or 0 to 10 V or –10 to 10 V.Model : CV500-CN228.
BASIC for connecting the unit ← → FIT10 (2m).Name: Two-tier Screw Terminal Block.
Specifications: Outputs; 8 outputs; PNP.
"Easy" and "Flexible" system expansion,
with linked CC-Link and CompoNet CP1H-XA40DT-D OPERATION MANUAL.
Branching is easily made with CompoNet.
Wiring material cost can be reduced.
Bit-level I/O distribution reduces,
wiring in the system.
A wide variety of CompoNet Slave Units,
contribute to system size reduction.
Seven-segment Display on the Gateway Unit,
helps to detect errors on site.
The Participation Flags and Communications,
Error Flags can be checked at the Host,
Controller to detect the location and,
content of the error. C500-DA Special I/O Unit Analog Output C500-DA103.
Output: 4 pts.
Specification: -10~+10V.I/O Cable (for I/O to Interrface Racks) 10 m (L) CV500-CN132Inputs: 8 CP1H-XA40DT-D Manual. Model: CPM2C-16ET1M. Units with transistor outputs only.
1 MIL connector.
Outputs: 16 outputs.
Input type: 24 VDC.
Output type: sourcing transistor.Model : CV500-CPU01-V1.
SFC / Laddeer 512 (with RAM30K words, the top internal link) CP1H-XA40DT-D Manual. Description : Connects peripheral port to D-sub 9pin connector.
Must be used with CS1W-CN114 (3.3m).