OMRON CP1L-EM40DT1-D Manual CP1L-EM40DT1-D REFERENCE MANUAL

Number of analog inputs: 4 inputs.
Number of analog outputs: 2 outputs.
Input signal ranges: –10 to 10 V, 0 to 10 V, 0 to 5 V.
Output signal ranges: –10 to 10 V.CPU Unit: CP1L-EL CPU Units with 20 Points.
Specifications: CPU type, Memory capacity: 5K steps
High-speed counters: 100 kHz, 4 axes Pulse outputs:
100 kHz, 2 axes (Models with transistor outputs only);
Power supply, DC power supply; Output method, Transistor output(sourcing);
Inputs, 12; Output, 8 CP1L-EM40DT1-D REFERENCE MANUAL CP1L-EM40DT1-D
Standards: CE.
High Performing Programmable Controller with Embedded Ethernet.
"CP1L-EM" and "CP1L-EL" has a standard-feature Ethernet port.
"CP1L-M" and "CP1L-L" has a standard-feature peripheral USB port.
Function blocks (FB) allow you to build up modular structure and,
programming of ladder diagrams CP1L-EM40DT1-D REFERENCE MANUAL. C500-CT/3G2A5-CT Special I/O Unit High-speed Counter Unit 50 kcps 1 pts C500-CT012(3G2A5-CT012).Specifications: Two RS-422A/485 ports.C500-IA I/O Unit AC Input 32 pts C500-IA122(3G2A5-IA122).
AC100-120V 10mA.Specifications: 8 Kwords with clock.2 thermocouple inputsModel: CPM2C-16ETM. Units with transistor outputs only CP1L-EM40DT1-D REFERENCE MANUAL.
1 MIL connector.
Outputs: 16 outputs.
Input type: 24 VDC.
Output type: sinking transistor.Model : CVM1D-BI102.
10-slot.Unit type: CS1 Special I/O Units.
Product name: Isolated-type DC Input Unit.
Input points : 8 inputs.
Signal range: 4 to 20 mA, 0 to 10 V,
0 to 5 V, 1 to 5 V.
Conversion speed (resolution):
250ms/8 inputs.
Externa connection: Removable erminal block.
No. of unit numbers allocated: 1.
Current consumption: 5V, 0.18A; 26V, 0.06A.
Standards: UC1, CE.
Provides the functionality of isolators,
power supplies, signal converters,
and other devices.
The Analog Input Unit converts analog,
input signals such as 1 to 5 V or 4 to 20mA,
into digital values, and takes the values,
scaled in industrial units, and transfers,
it to the CPU Unit as the process value.
Because of this, no ladder program is required,
at the CPU Unit for scaling.
The Analog Output Unit converts analog output set,
values from the CPU Unit to analog output signals,
such as 4 to 20 mA or 1 to 5 V, and outputs them.
The built-in functions, such as measurement value,
alarms, rate-of-change calculations, and square roots,
have enabled major savings in cost and space ccompared,
with previous systems CP1L-EM40DT1-D Manual.
High-resolution Models and 8-point Input Models are,
also available.
By combining the Units, logging/monitoring.
systems can be constructed,
or the Units can be used together with LCBs/LCCUs,
to construct complete process control systems CP1L-EM40DT1-D Manual.
Parameters can be easily displayed and set in an,
easy-to-understand form without special tools.