ZX-TDS10T | OMRON Smart Sensors ZX-TDS10T

Size: M8, Non-shielded.
Sensing distance: 4.0 mm.
Connection: M12 connector.
Body material: Brass.
Thread length (overall length): 27 (43).
Output configuration: PNP.
Operation mode NC.
Safe Mounting with Greater.
Sensing Distance.
Ensures a sensing distance approximately 1.5 to 2,
times larger than that of any conventional OMRON Sensor OMRON ZX-TDS10T.
Problems such as the collision of workpieces are eliminated ZX-TDS10T
Full range of standard sizes (M8, M12, M18 and,
M30; both long and short barrels).
Modular construction simplifies customization. Fitting materials: Stainless steel (SUS304).
Count: 1 .
Accessories: Description,Slotted/Phillips screws M3 × 8,
(with spring and plain washers);
Material, Stainless steel (SUS304);
Count, 2 OMRON ZX-TDS10T.
Applicable sensor (mounting pitch on sensor side): E3Z pre-wired model.
Page: Dimensions, 13. Size: M30, Non-shielded.
Sensing distance: 30.0 mm.
Connection: Pre-wired.
Body material: Brass.
Thread length (overall length): 66 (86).
Output configuration: NPN.
Operation mode NO.
Safe Mounting with Greater.
Sensing Distance.
Ensures a sensing distance approximately 1 OMRON ZX-TDS10T. 5 to 2,
times larger than that of any conventional OMRON Sensor.
Problems such as the collision of workpieces are eliminated.
Full range of standard sizes (M8, M12, M18 and,
M30; both long and short barrels).
Modular construction simplifies customization. Appearance: Standard Models, Unshielded 34 dia.
Sensing distance: 25 mm [3 to 25 mm *].
Model: Output configuration, DC 3-wire, NPN;
Operation mode, NC.
Long-distance Capacitive Sensor.
with Adjustable Sensitivity.
CE Marking for DC 3-wire models and AC/DC 2-wire models.
Noise-resistant models are also available for environments with,
strong noise. Optional laser sensor to provide the best laser sensor for different scenes at the most suitable price.
Make the workpiece color, material, surface state is different, can also be a compact body to achieve stability detection.
[stability] [rest assured].
OMRON original HSDR-CMOS (Seed and Dynamic Range High).
Dynamic range 500 thousand times ZX-TDS10T.
Adjusting the CMOS shutter time according to the workpiece.
Can adjust the power of light, to achieve the best of the diffusion of light intake.
The background is used as a benchmark to detect all parts of the benchmark.
CCan not be affected by the workpiece surface state and the stability of the impact of the tilt, even if the workpiece changes, there is no need to set ZX-TDS10T.