Home
>> Products
>> OMRON
>> Switch
>> Limit switch
>> General recumbent type limit switch
>> ZV-NA277-2 | OMRON Enclosed Switches ZV-NA277-2
ZV-NA277-2 | OMRON Enclosed Switches ZV-NA277-2
OMRON ZV-NA277-2 Manual And Instructions
ZV-NA277-2 datasheetPDF datasheet
OMRON ZV-NA277-2 Product information and technical parameters：
Brand: OMRON
Name: Enclosed Switches
Model: ZV-NA277-2
Actuator: Sealed (Booted); One-way action sealed roller arm lever; AC.
Mounting: Base mounting.
Approved standards: UL CSA.
General-purpose Enclosed.
Switches with High Breaking.
Capacity and High Durability.
Z General-purpose Basic Switches are built into ZE, ZV,
and ZV2 Switches. They provided high durability and high,
breaking capacity.
X Basic Switches with magnetic blowout are built into XE,
XV, and XV2 Switches. DC models have also been added,
to the series.
Three mounting methods (side, base, and diagonal side),
and many types of actuator are available.
Terminals face the front when the cover is removed for,
easy connection.
Switches with ground terminals have CE marking.
Approved by UL, CSA, and CCC (Chinese standard).
(Ask your OMRON representative for information on approved models.)
...More relevant models >>>>
ZV-NA277-2 datasheetPDF datasheet
OMRON ZV-NA277-2 Product information and technical parameters：
Brand: OMRON
Name: Enclosed Switches
Model: ZV-NA277-2
Actuator: Sealed (Booted); One-way action sealed roller arm lever; AC.
Mounting: Base mounting.
Approved standards: UL CSA.
General-purpose Enclosed.
Switches with High Breaking.
Capacity and High Durability.
Z General-purpose Basic Switches are built into ZE, ZV,
and ZV2 Switches. They provided high durability and high,
breaking capacity.
X Basic Switches with magnetic blowout are built into XE,
XV, and XV2 Switches. DC models have also been added,
to the series.
Three mounting methods (side, base, and diagonal side),
and many types of actuator are available.
Terminals face the front when the cover is removed for,
easy connection.
Switches with ground terminals have CE marking.
Approved by UL, CSA, and CCC (Chinese standard).
(Ask your OMRON representative for information on approved models.)
Model: A7PS.
Classification (See note 1.): Snap-in (front mounting).
Character height: Decimal: 6.8 mm Hexadecimal: 4.0 mm.
Terminals: Solder terminals.
Color: Light gray.
Output code number: 19 (decimal code, with component-adding provision).
Dust-tight, Easy-to-Use,
Push-operated Switches with Large OMRON ZV-NA277-2.
Display Characters.
Simple push mechanism and large, easy-to-view numeric display,
make setting easy ZV-NA277-2
Dust penetration prevented with seal for the display windows. Case color: Black.
Lighting method: LED; 24 VDC.
Display color symbol: R.O.G.W.
Large Rectangular-bodied Indicators.
Excellent illumination with even surface brightness.
Three-color models (green, orange, red; chameleon lighting),
included in lineup OMRON ZV-NA277-2. Modular panel direct mounting type, easy to install and maintain the basic type.
The relay unit is modular and easy to maintain.
With LED action display function, so that the state of action at a glance.
Tropical treatment and high temperature.
Stable detection can be achieved with high ambient temperature.
G4 type, with a water tank and a water supply tank level display and prevent the function of automatic water idling caused by water shortage OMRON ZV-NA277-2.
Package product name: 61F-G4 base * 1, 61F-11_ unit * 5.
Purpose: General use. Product name: Conductive Level Controller.
Model number: Relay contact (SPST-NO).
Battery (24 VDC) allows use in locations.
without AC power supply. AC sine-wave.
voltage between electrodes enables stable.
detection with no electric corrosion.
Outputs can be set to self-hold at ON or OFF using special circuits.
Adjustable sensitivity, with an operating resistance range of 0 to,
100 kΩ, allows use for a wide variety of liquids.
Relay contact chattering conventionally caused by waves elim,
inated using open collector output, reducing contact wear.
Meets CE marking and is a UL recognnized component ZV-NA277-2. Type: rectangle.
Screen mode: 2 short axis segmentation.
Light way: LED.
Power supply voltage: DC24V.
Operating part of the left color: green.
Operation Department right color: green.
Square 40mm body of the indicattor light series ZV-NA277-2.
The same type as the A3S series button switch.
Easy to install from the front panel and no tools to carry out the lamp replacement.
Classification (See note 1.): Snap-in (front mounting).
Character height: Decimal: 6.8 mm Hexadecimal: 4.0 mm.
Terminals: Solder terminals.
Color: Light gray.
Output code number: 19 (decimal code, with component-adding provision).
Dust-tight, Easy-to-Use,
Push-operated Switches with Large OMRON ZV-NA277-2.
Display Characters.
Simple push mechanism and large, easy-to-view numeric display,
make setting easy ZV-NA277-2
Dust penetration prevented with seal for the display windows. Case color: Black.
Lighting method: LED; 24 VDC.
Display color symbol: R.O.G.W.
Large Rectangular-bodied Indicators.
Excellent illumination with even surface brightness.
Three-color models (green, orange, red; chameleon lighting),
included in lineup OMRON ZV-NA277-2. Modular panel direct mounting type, easy to install and maintain the basic type.
The relay unit is modular and easy to maintain.
With LED action display function, so that the state of action at a glance.
Tropical treatment and high temperature.
Stable detection can be achieved with high ambient temperature.
G4 type, with a water tank and a water supply tank level display and prevent the function of automatic water idling caused by water shortage OMRON ZV-NA277-2.
Package product name: 61F-G4 base * 1, 61F-11_ unit * 5.
Purpose: General use. Product name: Conductive Level Controller.
Model number: Relay contact (SPST-NO).
Battery (24 VDC) allows use in locations.
without AC power supply. AC sine-wave.
voltage between electrodes enables stable.
detection with no electric corrosion.
Outputs can be set to self-hold at ON or OFF using special circuits.
Adjustable sensitivity, with an operating resistance range of 0 to,
100 kΩ, allows use for a wide variety of liquids.
Relay contact chattering conventionally caused by waves elim,
inated using open collector output, reducing contact wear.
Meets CE marking and is a UL recognnized component ZV-NA277-2. Type: rectangle.
Screen mode: 2 short axis segmentation.
Light way: LED.
Power supply voltage: DC24V.
Operating part of the left color: green.
Operation Department right color: green.
Square 40mm body of the indicattor light series ZV-NA277-2.
The same type as the A3S series button switch.
Easy to install from the front panel and no tools to carry out the lamp replacement.
...More relevant models >>>>
Last one: 
next one: Related download