Home
>> Products
>> OMRON
>> Power/other peripheral devices
>> UV-LED illuminator
>> ZUV-L3H | OMRON Smart Curing System ZUV-L3H
ZUV-L3H | OMRON Smart Curing System ZUV-L3H
OMRON ZUV-L3H Manual And Instructions
ZUV-L3H datasheetPDF datasheet
ZUV-L3H datasheetPDF datasheet
ZUV-L3H USER'S MANUAL
OMRON ZUV-L3H Product information and technical parameters：
Brand: OMRON
Name: Smart Curing System
Model: ZUV-L3H
Type: Spot lens.
Spot: Spot dia.: 3 mm.
Cost Revolution Led by UV Curing.
System.
Minimal heat damage thanks to UV-LED irradiation.
New UV LEDs with much higher brightness mounted in heads.
Greater irradiation power to reduce bonding tact time.
Usage of LEDs that have a long lifetime of 40,000,
hours* drastically reduces running costs.
Ultra compact body that is approximately 1/8th the size,
of a conventional lamp system.
Equipped with a color LCD that makes settings simple and reliable.
...More relevant models >>>>
ZUV-L3H datasheetPDF datasheet
ZUV-L3H datasheetPDF datasheet
ZUV-L3H USER'S MANUAL
OMRON ZUV-L3H Product information and technical parameters：
Brand: OMRON
Name: Smart Curing System
Model: ZUV-L3H
Type: Spot lens.
Spot: Spot dia.: 3 mm.
Cost Revolution Led by UV Curing.
System.
Minimal heat damage thanks to UV-LED irradiation.
New UV LEDs with much higher brightness mounted in heads.
Greater irradiation power to reduce bonding tact time.
Usage of LEDs that have a long lifetime of 40,000,
hours* drastically reduces running costs.
Ultra compact body that is approximately 1/8th the size,
of a conventional lamp system.
Equipped with a color LCD that makes settings simple and reliable.
Cable length L: 2.0 m.
Connect Connector-Terminal,
Block Conversion Units (XW2@) to,
I/O Units for Programmable,
Controllers with one touch. Type: With cable.
Connector: Connectors on both cable ends.
DC: Cable length L, 1 m; Minimum order, 5.
Water- and Environment-resistive FA.
Connectors Save Wiring and Maintenance Effort OMRON ZUV-L3H.
Compact FA connectors meet IP67 requirements and ensure a,
94V-0 fire retardant rating ZUV-L3H
A wide array of connectors makes a wiring system more modular,
simplifies maintenance, and reduces downtime.
Connectors with Cables and Connector Assemblies are available.
Three types of Connector Assembly: Crimping, soldering, and screw-on.
Connectors with Cables are UL certified OMRON ZUV-L3H.
Based on IEC61076-2-101 (IEC60947-5-2) and NECA 4202. Protect motors and other equipment from unstable,
voltages in the power supply system.
Protect motors and other equipment by detecting,
overvoltages, undervoltages, phase sequence, and,
phase loss for three-phase power supplies.
Phase loss detection while the motor is operating.
Global power supply support. (Changed with a switch OMRON ZUV-L3H. ).
Greater resistance to inverter noise.
Width of 17.5 mm to reduce space required in panels.
Push-In Plus Terminal that reduce wiring work.
The use of cage clamps enables wiring with bare stranded wires.
Double-insertion holes for crossover wiring (all terminals).
UL listed for easy shipping to North America.
Certification is pending for LR standards.
Models added with transistor outputs for superior contact reliability. Time specification: Inverse type.
Current setting range: 50 to 160 A.
Operating voltage: 200/220/240 VAC.
Resetting method: Manual.
Solid-state Relay Enables Choice of Three.
Operating Functions (Overcurrent, Open,
phase, and Reverse-phase).
Protects 3-phase induction motors and their loads from damage.
Selection and combination of operating functions from overcur,
rent, open-phase, and reverse-phase.
Circuit and output relay operation can be checked by just operat,
ing the test button.
The set time value can be checked easily because operation time,
is indicated from the start of operation ZUV-L3H.
Space-saving, integrated construction.
Note: If the K2CM is used with an inverter, the operating conditions will,
depend on the load wiring length, inverter carrier frequency, basic,
frequency, and load conditions ZUV-L3H. Error will occur in the operating,
values of the overload elements. It is recommended to test operation,
before using the K2CM.
Connect Connector-Terminal,
Block Conversion Units (XW2@) to,
I/O Units for Programmable,
Controllers with one touch. Type: With cable.
Connector: Connectors on both cable ends.
DC: Cable length L, 1 m; Minimum order, 5.
Water- and Environment-resistive FA.
Connectors Save Wiring and Maintenance Effort OMRON ZUV-L3H.
Compact FA connectors meet IP67 requirements and ensure a,
94V-0 fire retardant rating ZUV-L3H
A wide array of connectors makes a wiring system more modular,
simplifies maintenance, and reduces downtime.
Connectors with Cables and Connector Assemblies are available.
Three types of Connector Assembly: Crimping, soldering, and screw-on.
Connectors with Cables are UL certified OMRON ZUV-L3H.
Based on IEC61076-2-101 (IEC60947-5-2) and NECA 4202. Protect motors and other equipment from unstable,
voltages in the power supply system.
Protect motors and other equipment by detecting,
overvoltages, undervoltages, phase sequence, and,
phase loss for three-phase power supplies.
Phase loss detection while the motor is operating.
Global power supply support. (Changed with a switch OMRON ZUV-L3H. ).
Greater resistance to inverter noise.
Width of 17.5 mm to reduce space required in panels.
Push-In Plus Terminal that reduce wiring work.
The use of cage clamps enables wiring with bare stranded wires.
Double-insertion holes for crossover wiring (all terminals).
UL listed for easy shipping to North America.
Certification is pending for LR standards.
Models added with transistor outputs for superior contact reliability. Time specification: Inverse type.
Current setting range: 50 to 160 A.
Operating voltage: 200/220/240 VAC.
Resetting method: Manual.
Solid-state Relay Enables Choice of Three.
Operating Functions (Overcurrent, Open,
phase, and Reverse-phase).
Protects 3-phase induction motors and their loads from damage.
Selection and combination of operating functions from overcur,
rent, open-phase, and reverse-phase.
Circuit and output relay operation can be checked by just operat,
ing the test button.
The set time value can be checked easily because operation time,
is indicated from the start of operation ZUV-L3H.
Space-saving, integrated construction.
Note: If the K2CM is used with an inverter, the operating conditions will,
depend on the load wiring length, inverter carrier frequency, basic,
frequency, and load conditions ZUV-L3H. Error will occur in the operating,
values of the overload elements. It is recommended to test operation,
before using the K2CM.
...More relevant models >>>>
Last one: 
next one: Related download