OMRON
Home >> Products >> OMRON >> Power/other peripheral devices >> Data recorder >> ZR-XRE1 | OMRON Data Logger ZR-XRE1

ZR-XRE1 | OMRON Data Logger ZR-XRE1

OMRON ZR-XRE1 Manual And Instructions
ZR-XRE1 datasheetPDF datasheet
ZR-XRE1 USER'S GUIDE

OMRON ZR-XRE1 Product information and technical parameters:
Brand: OMRON
Name: Data Logger
Model: ZR-XRE1
Item: Base Set (For ZR-RX45).
Easy-to-use and Compact 10-Channel Logger,
with Internal 4 GB Flash Memory.

Type: Daisy Chain.
Terminal Block: Terminal block with M3.5 screws.
Connector: Flat Cable Connectors*1.
No. of poles: 20.
Simplifies Connector and terminal,
block replacement, and requires less,
in-panel wiring.
Mount to DIN Track or via screws.
MIL Flat Cable Connectors and Multi-pole, Square,
Connectors are standard OMRON ZR-XRE1.
Terminal blocks available with either M3 or M3.5 screws ZR-XRE1
Connecting Cables for Programmable Controllers,
available (sold separately). Models: 3 UVR (27).
Protection of distributed power supply connection to power system,
The relay is smaller, and the protection unit is more enriched.
Waste heat generation system improve the comprehensive energy efficiency and the use of natural,
Energy of wind power generation, the spread of power is becoming more and more popular OMRON ZR-XRE1.
This relay is used to detect the internal fault of the user in the distributed power supply,
Power line accident of distributed power supply and relay protection system.
The relay can be meet in Japan (system connected instant points specified in the standard model),
Function, can be through more than 20 kinds of products to establish the best protection system OMRON ZR-XRE1.
Can also correspond to the generator and the electric side / internal tributaries.
Unit with 2 relay elements.
In each unit, the variable action time circuit is hidden, so that the coordination design is more convenient.
All aircraft equipped with a locking relay terminal.
DSR can correctly determine the direction of the sudden drop in the voltage to 0 of the short-circuit accident.
2 stage cross terminal stand with cover with convenient wiring. Cable length L: A, 10.0 m; B, 9.75 m.
Connect Connector-Terminal,
Block Conversion Units (XW2@) to,
I/O Units for Programmable,
Controllers with one touch. Appearance: insert type.
Control supply voltage: DC48V.
Action elements: overload detection.
Action characteristic: anti time limit action type.
Especially suitable for single phase motor over current protection.
Can be used for motor overload protection, common single-phase circuit of the AC current detection.
A variety of models, such as anti time limit characteristicss, lock time, instantaneous action, etc ZR-XRE1. , are provided,
The product is rich in variety, and can be effectively protected, detected and controlled according to the actual situation.
When the current is large, the input resistance of the CT orr the relay part is not needed, and the use is simple ZR-XRE1.
Because it is a plug-in, installation, disassembly, wiring and other operations are very simple.


...More relevant models >>>>