XS6W-6LSZH8SS1500CM-Y | OMRON Industrial Ethernet Cables XS6W-6LSZH8SS1500CM-Y

Cable: With cable.
Connector: Connector on one cable end.
Cable length L: 2 m.
Minimum order: 5.
Small Round Water-resistive.
Connectors.
Water-resistive, compact connector meets IP67 requirements.
Conventional M8 screw-mounting models are available along with,
S8 snap-in models that connect and disconnect with one touch OMRON XS6W-6LSZH8SS1500CM-Y.
Ideal for a wide variety of FA and OA applications XS6W-6LSZH8SS1500CM-Y
Connectors on both cable ends require no harness work.
Some new M8 models with 3 or 5 poles. Cable length L: A, 1.0 m; B, 0.75 m; C, 1.0 m.
Connect Connector-Terminal,
Block Conversion Units (XW2@) to,
I/O Units for Programmable,
Controllers with one touch. Rated voltage: 100 V .
Permitted voltage fluctuation range: 85% to 110% rated voltage OMRON XS6W-6LSZH8SS1500CM-Y.
Frequency: 50/60 Hz.
Rated current: 50 Hz, 0.100 A; 60 Hz, 0.085 A .
Rated input: 50 Hz, 7 W ; 60 Hz, 6 W .
Rated rotational speed: 50 Hz, 1900 r/min; 60 Hz, 2200 r/min.
Maximum flow rate: 50 Hz, 0.7 m3/min; 60 Hz, 0.8 m3/min.
Maximum static pressure: 50 Hz, 24.5 Pa; 60 Hz, 34.3 Pa.
Noise: 50 Hz, 29 dB; 60 Hz, 32 dB.
Optimum Cooling with a Comprehensive OMRON XS6W-6LSZH8SS1500CM-Y.
Lineup of Axial Fans.
Low noise level, long service life, and resistance to the,
environment.
Shaft supported by ball bearings for highly-reliable operation.
Plastic-bladed models (44 type) and metal-bladed models,
(28 type) included in series.
R87T-A@A15H-WR Water-resistant AC Axial Fans,
(IP X7 degree of protection) added to series.
CE marking compliant and certified by UL and CSA.
Note: The compliant standards and certified safety standards depend on the,
product. Check the information given for available models of Axial fans and,
the information in Characteristics. Measuring current: 2 to 20 mA AC/DC, 10 to 100 mA AC/DC, 50 to 500 mA AC/DC.
Supply voltage: 100-115 VAC.
Ideal for current monitoring for,
industrial facilities and equipment.
Monitor for overcurrents or undercurrents.
Manual resetting and automatically resetting supported by one Relay.
Starrtup lock and operating time can be set separately XS6W-6LSZH8SS1500CM-Y.
One SPDT output relay, 6 A at 250 VAC (resistive load).
Output relay can be switched between normally open and,
normally closed.
Process control signal (4 to 20 mA) and coommercial CT input,
(0 to 1 A or 0 to 5 A) supported XS6W-6LSZH8SS1500CM-Y.
Output status can be monitored using LED indicator.
Inputs are isolated from the power supply.