XS5W-T421-GMC-K | OMRON Industrial Ethernet Cables XS5W-T421-GMC-K

Sensor type: 3 wire DC / DC (NPN) 3 - 4 2 wire.
Input points: 8.
The I/O sensor connector for centralized wiring,
And the province of the number of processes, strong environmental resistance as the goal,
The outer control relay box.
Compact and strong centralized wiring trunk box conforming to IP67.
The corresponding sensing I/O connector mode proximity switch, limit switch,
Photoelectric switch OMRON XS5W-T421-GMC-K XS5W-T421-GMC-K
With the power to show LED, action shows LED.
The installation dimensions are the same and are not related to the number of input points,
Therefore, the addition of a simple exchange.
A series of sensors with self diagnostic features are added to the product. Cable with connector (1 to 1) /G79-_C.
L size: 5000mm OMRON XS5W-T421-GMC-K.
Cable and loose wire cable with loose wire pressing connecting terminal,
Connector cable, MITSUBISHI motor produced PLC connection cable. Cable length L: A, 2.0 m; B, 1.75 m; C, 2.0 m.
Connect Connector-Terminal,
Block Conversion Units (XW2@) to,
I/O Units for Programmable,
Controllers with one touch. Product: Shower Nozzle; 90°.
Wide Range of Nozzles for Optimal.
Ionization OMRON XS5W-T421-GMC-K.
A wide range of nozzle variations.
High-frequency AC method with excellent ion balance. Pitch: 27.5 mm.
Applicable models: PYF14S.
Insulation color: Red.
A Wide Variety of Square and,
Round Sockets in Front-mounting,
and Back-mounting Models,
Models available with finger protection.
Hold-down Clips and Socket Bridges for PYF Sockets,
are also available.
New screwless models available. Measuring voltage: 1 to 10 V AC/DC, 3 to 30 V AC/DC, 15 to 150 V AC/DC.
Supply voltage: 100-115 VAC.
Ideal for voltage monitoring for industrial.
facilities and equipment.
Monitor for overvoltages and undervoltages simultaneously.
Separate settings and outputs supported for overvoltages and,
unddervoltages XS5W-T421-GMC-K.
Manual resetting and automatically resetting supported by one Relay.
Pre-alarm Monitoring Mode.
Two SPDT output relays, 6 A at 250 VAC (resistive load).
Process control signal (0 to 10 V) and current splitter input ssupported XS5W-T421-GMC-K.
Output status can be monitored using LED indicator.
Input frequency of 40 to 500 Hz supported.
Inputs are isolated from the power supply.