Home
>> Products
>> OMRON
>> Power/other peripheral devices
>> Connection / Save wiring equipment
>> Industrial Ethernet connector
>> XS5W-T421-DM2-K | OMRON Industrial Ethernet Cables XS5W-T421-DM2-K
XS5W-T421-DM2-K | OMRON Industrial Ethernet Cables XS5W-T421-DM2-K
OMRON XS5W-T421-DM2-K Manual And Instructions
XS5W-T421-DM2-K datasheetPDF datasheet
OMRON XS5W-T421-DM2-K Product information and technical parameters：
Brand: OMRON
Name: Industrial Ethernet Cables
Model: XS5W-T421-DM2-K
Cable type: Standard Cables.
Type: Cable with Plugs on Both Ends (M12 Straight/M12 Straight).
Cable length: 2 m.
Cables and Connectors for,
EtherCAT® and Other Industrial,
Ethernet Networks.
...More relevant models >>>>
XS5W-T421-DM2-K datasheetPDF datasheet
OMRON XS5W-T421-DM2-K Product information and technical parameters：
Brand: OMRON
Name: Industrial Ethernet Cables
Model: XS5W-T421-DM2-K
Cable type: Standard Cables.
Type: Cable with Plugs on Both Ends (M12 Straight/M12 Straight).
Cable length: 2 m.
Cables and Connectors for,
EtherCAT® and Other Industrial,
Ethernet Networks.
I/O classification: Input.
I/O points: 16.
Internal I/O circuit common: NPN (– common).
Rated voltage: 100 (110) VAC, 200 (220) VAC.
Single Cable Connection to PLC Means.
Space is Saved and Less Control Panel.
Wiring is Required.
Compact size: 182 (W) 85 (D) 68 (H) mm,
(8-point Output Block width is 102 mm) OMRON XS5W-T421-DM2-K.
Connects to the PC through the connecting cable,
(G79 Series) and connector, and requires only a,
snap-in operation XS5W-T421-DM2-K
Surge suppressor circuit built-in.
Immediate recognition of I/O signal status using,
LED operation indicators.
G3TA I/O Solid-state relay can be mounted instead,
of G7T.
Mounts easily on a DIN track.
Approved by UL, CSA (except for G7TC-OC16-1). Configuration: Covered Power Supplies OMRON XS5W-T421-DM2-K.
Input voltage: 100 to 240 VAC (free) (80 to 370 VDC *).
S8JX-G15005@@:Switchable between 100 to 120 VAC and 200 to 240 VAC.
(DC power cannot be input.).
Power ratings: 35 W.
Output voltage: 15 V.
Output current: 2.4 A.
Built-in fan: No.
Easy-to-use, Widely range from 15 W to 600 W (Output Voltage: 5 V to 48 V).
Easy Mounting: Front-mounted type, DIN rail-mounted type are available OMRON XS5W-T421-DM2-K.
Screw-mount at the top. (except 300-/600-W models).
Safety standards: UL 508/60950-1, cUL CSA C22.2 No. 107.1,
cUR CSA C22.2 No. 60950-1.
EN 50178 (= VDE 0160) Over voltage.
category III.
EN 60950-1 (= VDE 0805 Teil 1).
EMC: Conforms to EN 61204-3.
(EMI:EN55011 ClassA).
Input conditions: The input voltage range of 15-W, 35-W,
50-W, 100-W, and 150-W models has,
been increased to 80 to 370 VDC (EC Directives and safety standards do not apply.).Control supply voltage: 100 VAC; With voltage fluctuation compensation.
Operating current: 32 to 80 A.
Accurate Detection of Heater Element.
Burnout Regardless of Heater Capacities.
Accurately detects a burned heater element or elements incor,
porated by a molding machine or packing machine and outputs,
an alarm signal.
Precisely singles out thee burned element even if one heater el,
ement among several heater elements has been burned out XS5W-T421-DM2-K.
Applicable to small- to large-capacity heater elements.
All K2CU-F large-capacity, built-in current transformer models,
work with booth single-phase and three-phase heaters XS5W-T421-DM2-K.
Voltage fluctuation compensation function eliminates false,
alarms due to variations in the supply voltage.
I/O points: 16.
Internal I/O circuit common: NPN (– common).
Rated voltage: 100 (110) VAC, 200 (220) VAC.
Single Cable Connection to PLC Means.
Space is Saved and Less Control Panel.
Wiring is Required.
Compact size: 182 (W) 85 (D) 68 (H) mm,
(8-point Output Block width is 102 mm) OMRON XS5W-T421-DM2-K.
Connects to the PC through the connecting cable,
(G79 Series) and connector, and requires only a,
snap-in operation XS5W-T421-DM2-K
Surge suppressor circuit built-in.
Immediate recognition of I/O signal status using,
LED operation indicators.
G3TA I/O Solid-state relay can be mounted instead,
of G7T.
Mounts easily on a DIN track.
Approved by UL, CSA (except for G7TC-OC16-1). Configuration: Covered Power Supplies OMRON XS5W-T421-DM2-K.
Input voltage: 100 to 240 VAC (free) (80 to 370 VDC *).
S8JX-G15005@@:Switchable between 100 to 120 VAC and 200 to 240 VAC.
(DC power cannot be input.).
Power ratings: 35 W.
Output voltage: 15 V.
Output current: 2.4 A.
Built-in fan: No.
Easy-to-use, Widely range from 15 W to 600 W (Output Voltage: 5 V to 48 V).
Easy Mounting: Front-mounted type, DIN rail-mounted type are available OMRON XS5W-T421-DM2-K.
Screw-mount at the top. (except 300-/600-W models).
Safety standards: UL 508/60950-1, cUL CSA C22.2 No. 107.1,
cUR CSA C22.2 No. 60950-1.
EN 50178 (= VDE 0160) Over voltage.
category III.
EN 60950-1 (= VDE 0805 Teil 1).
EMC: Conforms to EN 61204-3.
(EMI:EN55011 ClassA).
Input conditions: The input voltage range of 15-W, 35-W,
50-W, 100-W, and 150-W models has,
been increased to 80 to 370 VDC (EC Directives and safety standards do not apply.).Control supply voltage: 100 VAC; With voltage fluctuation compensation.
Operating current: 32 to 80 A.
Accurate Detection of Heater Element.
Burnout Regardless of Heater Capacities.
Accurately detects a burned heater element or elements incor,
porated by a molding machine or packing machine and outputs,
an alarm signal.
Precisely singles out thee burned element even if one heater el,
ement among several heater elements has been burned out XS5W-T421-DM2-K.
Applicable to small- to large-capacity heater elements.
All K2CU-F large-capacity, built-in current transformer models,
work with booth single-phase and three-phase heaters XS5W-T421-DM2-K.
Voltage fluctuation compensation function eliminates false,
alarms due to variations in the supply voltage.
...More relevant models >>>>
Last one: OMRON Industrial Ethernet Cables XS5W-T421-CM2-K
next one: OMRON Industrial Ethernet Cables XS5W-T421-EM2-K
Related download