XS2H-D821-CH0-C | OMRON Round Water-resistant Connectors XS2H-D821-CH0-C

Time specification: Instantaneous type.
Current setting range: 8 to 26 A.
Operating voltage: 100/110/120 VAC.
Resetting method: Automatic (See note.).
Solid-state Relay Enables Choice of Three.
Operating Functions (Overcurrent, Open,
phase, and Reverse-phase).
Protects 3-phase induction motors and their loads from damage OMRON XS2H-D821-CH0-C.
Selection and combination of operating functions from overcur,
rent, open-phase, and reverse-phase XS2H-D821-CH0-C
Circuit and output relay operation can be checked by just operat,
ing the test button.
The set time value can be checked easily because operation time,
is indicated from the start of operation.
Space-saving, integrated construction.
Note: If the K2CM is used with an inverter, the operating conditions will,
depend on the load wiring length, inverter carrier frequency, basic,
frequency, and load conditions OMRON XS2H-D821-CH0-C. Error will occur in the operating,
values of the overload elements. It is recommended to test operation,
before using the K2CM. Classification: Output.
Internal I/O circuit common: NPN (+ common).
Rated voltage: 24 VDC.
Reduces Wiring while Providing I/O OMRON XS2H-D821-CH0-C.
Flexibility.
Mount I/O relays and I/O SSRs freely.
Electric-shock preventive (finger-touch protection) terminal.
block incorporated conforming to VDE 0160.
Connects to the PC and SBC easily via a connector.
DIN track mounted.
I/O Block conforming to VDE 0160. Sensor type: 2 wire DC type 1 - 4 / 3 - 4 non polarity.
Input points: 6.
The I/O sensor connector for centralized wiring,
And the province of the number of processes, strong environmental resistance as the goal,
The outer control relay box.
Compact and strong centralized wiring trunk box conforming to IP67 XS2H-D821-CH0-C.
The corresponding sensing I/O connector mode proximity switch, limit switch,
Photoelectric switch.
With the power to show LED, action shows LED.
The installation dimensions are the same and are not related too the number of input points,
Therefore, the addition of a simple exchange XS2H-D821-CH0-C.
A series of sensors with self diagnostic features are added to the product.