Actuator: Resin rod (rod diameter: 8).
Item: Basic.
Pretravel (PT): 40±20 mm.
Environment-resistant, and Spatter prevention Switches.
Standard-feature gold-clad crossbar contacts provide high reliability.
Applicable to either standard loads or microloads.
one-side operation, and four-direction head mounting.
Approved standards: EN/IEC, UL, cUL, and CCC.
Contact your OMRON representative for information on approved models.
Appearance: Round/Full-guard type LED voltage-reduction lighting,
(with Voltage Reduction Unit) A22L-G.
Output: SPST-NO + SPST-NO.
Lighting: LED.
Operating voltage: 200 VAC.
Operation: Alternate operation (self-holding).
Illumination color: R (red); Y (yellow); G (green); W (white); A (blue).
Install in 22-dia OMRON WLNJ-2-N. or 25-dia. Panel Cutout.
(When Using a Ring).
Lever for easily mounting and removing the Switch Unit
WLNJ-2-N
Increase wiring efficiency with three-row mounting of Switch Blocks.
Finger protection mechanism on Switch Unit provided as a standard feature.
Use 25-dia. ring to install in 25-dia. panel cutouts.
Mounted using either open-type (fork-type) or closed-type.
(round-type) crimp terminals OMRON WLNJ-2-N.
IP65 oil resistance (non-lighted models).
IP65 (lighted models). No. of notches: 2 notches.
Output: SPDT.
Reset method: Manual.
Lighting method: LED.
Separate Construction with Cylindrical.
16-dia. Body.
Same separate construction as the A16-series Pushbuttons with,
Miniature Design of 28.5 mm.
The same contacts can be used for both standard loads and,
microloads.
Oil-resistant IP65 models,
Conforms to EN60947-5-1 OMRON WLNJ-2-N. Improved Design for a More Lightweight.
Construction and Reduced Standby Power,
Consumption.
Standby power reduced to 85% or less of previous models. (Applicable to 61F-GN.)
Weighs only 85% or less of previous models. (Applicable to 61F-G3N/-G4N.)
Easy identification of operating status with LED operation indicator.
Increased reliability of internal relay (micro load: 5 VDC, 1 mA),
to enable PLC input.
Electrode terminals and other wiring terminals are separated for easy wiring.
Select from three mounting methods: JEM, DIN rail mounting,
or screw mounting. Output: DPDT.
Lighting: LED without Voltage Reduction Unit.
Operating voltage: 24 VAC/VDC.
Pushbutton colorsymbol: R: red, Y: yellow; PY: pure yellow
G: green, A: blue; W: white; PW: pure white WLNJ-2-N.
Item: Alternate operation (Self-holding).
Separate Construction with.
Cylindrical 16-dia. Body.
Miniature design of 28.5 mm, the smallest class in the industry.
Detaachable Switch WLNJ-2-N.
The same contacts can be used for both standard loads and microloads.
Easy-to-wire terminal arrangement.
Certified for EN 60947-5-1.