OMRON
Home >> Products >> OMRON >> Switch >> Limit switch >> Universal vertical limit switch >> WLMCA2-LD-N | OMRON Two-circuit Limit Switch/Long-life Two-circuit Limit Switch WLMCA2-LD-N

WLMCA2-LD-N | OMRON Two-circuit Limit Switch/Long-life Two-circuit Limit Switch WLMCA2-LD-N

OMRON WLMCA2-LD-N Manual And Instructions
WLMCA2-LD-N datasheetPDF datasheet

OMRON WLMCA2-LD-N Product information and technical parameters:
Brand: OMRON
Name: Two-circuit Limit Switch/Long-life Two-circuit Limit Switch
Model: WLMCA2-LD-N
Item: Operation indicator (LED) *1; Basic 15±5°.
Actuator: Roller lever: R38, screw terminals.
Select the Best Two-circuit Switch for the,
Operating Environment and Application,
from a Wide Range of Models,
A wide selection of models is available, including General-purpose,
Environment-resistant, and Spatter prevention Switches.
Standard-feature gold-clad crossbar contacts provide high reliability.
Applicable to either standard loads or microloads.
Switches with Lever Actuators provide 90° overtravel,
one-side operation, and four-direction head mounting.
Approved standards: EN/IEC, UL, cUL, and CCC.
Contact your OMRON representative for information on approved models.

Terminal: Screw terminal (-B).
Actuator: Hinge roller lever.
Direct Current Switch with.
Built-in Magnetic Blowout.
Incorporates a small permanent magnet in the contact.
mechanism to deflect the arc to effectively extinguish it.
Same shape and mounting procedures as the Z Basic Switches. Ratings: Standard load; 4 A at 30 VDC OMRON WLMCA2-LD-N.
Cable: VCTF cable *2.
Actuator: Roller lever, high sensitivity WLMCA2-LD-N
Cable length : 3 m.
Compact Limit Switch That''s Also.
Thin and Highly Sealed.
Approved by EN, UL, CSA, and CCC (Chinese standard).
(Ask your OMRON representative for information on approved models.)
Sealing characteristics that meet IEC IP67 degree of protection.
Triple-sealed construction:
Plunger section sealed via nitrile rubber packing seal and,
diaphragm; switch section sealed via nitrile rubber cap;
cable entrance sealed via encapsulating material OMRON WLMCA2-LD-N.
Cable lengths of 3 and 5 m available on standard models.
Models also available with UL and CSA-certified cables.
Multiple mounting possible with Switches with Plungers.
Models with red LED indicators added to series for easy,
confirmation of operation OMRON WLMCA2-LD-N.
(Set by default to light for non-operation.)
VCTF oil-resistant cables with CE marking.
(Applicable only to standard models.)Size: 35mm.
Type: 4 lines.
Lighting voltage: DC24V.
Color: blue.
Large tactile buttons and uniform lighting to create a general space.
Backlight brings a uniform, elegant and pleasant lighting.
Large tactile buttons are easier to touch.
Drive rod mechanism to keep the direction of the parallel button, even if the pressure on the side of the.
Damping mechanism to ensure high impact resistance.
A slim body with a thiickness of 14 WLMCA2-LD-N. 6 mm. Type: rectangle.
Screen mode: 2 short axis segmentation.
Light way: LED.
Power supply voltage: 28V
Operating part of the left color: yellow.
Operation Department right color: red.
Square 40mm body of the indicattor light series WLMCA2-LD-N.
The same type as the A3S series button switch.
Easy to install from the front panel and no tools to carry out the lamp replacement.


...More relevant models >>>>