Event input terminal 5 points (TIMING, S-TIM, HOLD, RESET, ZERO) is equipped with.
The most suitable voltage and current signal simulation, measurement and display, identification of the panel table.
Action determine the color, can switch the green / Red 2 kinds of color display.
External event input can be applied to a variety of measurement and identification situations.
Series of DeviceNet type.
Type: no instantaneous contact.
Terminal configuration type: special terminal configuration.
Pin type: 8 pin.
Action mode / reset mode: time limit action / auto reset.
Output mode: contact output.
Installation method: embedded installation / front mounting.
1 units can be in 0.5 seconds to 120 seconds, select the 4 time range OMRON K3HB-XVD-CPAC21 AC/DC24.
Achieved UL, CSA, NK, LR certification, in compliance with EN61812-1
K3HB-XVD-CPAC21 AC/DC24
Conform to the CE mark, CCC. Operating modes: Flicker ON start.
Supply voltage: 100 to 240 VAC/100 to 125 VDC, 24 to 48 VAC/12 to 48 VDC.
0.05 s to 300 h models: 11-pin models.
DIN 48 × 48-mm Twin Timers.
Wide power supply ranges of High Voltage 100 to 240 VAC/100,
to 125 VDC and Low Voltage 24 to 48 VAC/12 to 48 VDC OMRON K3HB-XVD-CPAC21 AC/DC24.
ON- and OFF-times can be set independently and so,
combinations of long ON- or OFF-time and short OFF- or ON,
time settings are possible.
Twenty-four time ranges from 0.05 s to 300 h depending on the,
model to be used.
Models with a flicker ON start or flicker OFF start are available.
Easy sequence checks through instantaneous outputs for a,
zero set value at any time range OMRON K3HB-XVD-CPAC21 AC/DC24.
Length, when panel-mounted with a Socket, of 80 mm or less.
11-pin and 8-pin models are available. Timer input: PNP/NPN universal DC voltage input(4.5 to 30 VDC).
Display: 7-segment LCD with backlight.
Time range: 999999.9h ←→ 3999d23.9h(switchable); Black body.
Seven digits, time range 0 to 3999d23.9h.
Dual time range: 999999.9 ←→ 3999d23.9h or,
999h59m59s ←→ 9999h59.9m. Compact Economical Totalizer with High Visibility.
Available with Backlit LCD Display.
Large display with 8.6-mm character height.
Includes new models with backlight for improved visibility in dimly lit places. (Requires 24-VDC power supply.).
Black and light-gray cases now available.
PNP/NPN universal DC voltage input types now available.
Battery is replaceable for Totalizer reuse and conservation of the environment.
Key-protect switch to prevent faulty reset key operation.
Dual operation mode.
Front face compatible with NEMA4/IP66.
Short body, all models have a depth of 48.5 mm.
Finger protection terminal block cconforms to VDE0106, Part100 K3HB-XVD-CPAC21 AC/DC24.
Conforms to UL, CSA, and CE marking.
Conforms to EN61010-1 (pollution degree 2/overvoltage category III.).
Conforms to EMC standards and EN61326, thus allowing use in residential,
commerciall and light- and heavy-industry environments K3HB-XVD-CPAC21 AC/DC24.
Six-language instruction manual provided.
PCB-mounting models available. (Requires 3-V power supply.).