K3HB-XAA-L2AT11 AC/DC24 | OMRON Voltage and current panel meter K3HB-XAA-L2AT11 AC/DC24

K3HB-XAA-L2AT11 AC/DC24 Introduce | Catalog / Manual / Instructions / Software download

OMRON K3HB-XAA-L2AT11 AC/DC24 Manual And Instructions
K3HB-XAA-L2AT11 AC/DC24 datasheetPDF datasheet

OMRON K3HB-XAA-L2AT11 AC/DC24 Product information and technical parameters：
Brand: OMRON
Name: Voltage and current panel meter
Model: K3HB-XAA-L2AT11 AC/DC24
Type of input: AC current input.
Output type: linear; voltage; NPN open collector (HH, H, PASS, L, LL).
Event input terminal 5 points (TIMING, S-TIM, HOLD, RESET, ZERO) is equipped with.
External supply 80mA DC12V.
Power supply voltage: AC/DC24V.
96 (W) * 48 (H * 95mm) depth
Some models are not equipped with.
The most suitable voltage and current signal simulation, measurement and display, identification of the panel table.
Action determine the color, can switch the green / Red 2 kinds of color display.
Equipped with the sub pressure gauge for monitoring the operation trend.
External event input can be applied to a variety of measurement and identification situations.
DeviceNet type

Type: instantaneous contact.
Terminal configuration type: special terminal configuration.
Pin type: 8 pin.
Action mode / reset mode: time limit action / auto reset.
Output mode: contact output.
Installation method: embedded installation / front mounting.
1 units can be in 0.5 seconds to 120 seconds, select the 4 time range OMRON K3HB-XAA-L2AT11 AC/DC24.
Achieved UL, CSA, NK, LR certification, in compliance with EN61812-1 K3HB-XAA-L2AT11 AC/DC24
Conform to the CE mark, CCC. Supply voltage: 24 VDC.
Time-limit contact: 4PDT (Twin contacts).
Short-time range model (0.1 s to 10 min).
Miniature Timer with Multiple Time Ranges,
and Multiple Operating Modes.
UL listed when used with a Push-In Plus Terminal Block Socket.
Conforms to CSA, CE Marking, LR, and CCC OMRON K3HB-XAA-L2AT11 AC/DC24.
Black design with power supply terminals on top and contact output,
terminals on bottom.
Standard multiple operating modes and multiple time ranges.
Pin configuration compatible with MY Power Relay.
Minimizes stock. Type: H7CX-A Series.
Classification: Preset counter.
Configuration: 1-stage preset counter; Total and preset counter.
External connections: 11-pin socket OMRON K3HB-XAA-L2AT11 AC/DC24.
Settings: 1-stage.
Display digit: 4 digits.
Outputs: Transistor output (SPST).
Power supply voltage: 100 to 240 VAC.
Ultra-compact Counter Provides More,
Complete Functionality.
Basic Features.
Short body with depth of only 59 mm (for 12 to 24-VDC Models with,
Screw Terminals).
Better readability with character height of 12 mm on 4-digit models,
and 10 mm on 6-digit models.
The present value display characters can be switched between red,
green, and orange.
Safety and Reliability.
New set value limit and counter functions have been added.
Other Features.
Front Panel can be changed to white or light gray.
New models with two tachometer inputs and two tachometer outputs have,
been added to the series. Type of input: platinum resistance / thermocouple input.
Event input terminal 4 points (TIMING, S-TIM, HOLD, RESET) is equipped with.
Communication: RS-485; NPN open collector (HH, H, PASS, L, LL).
96 (W) * 48 (H * 95mm) depth.
Power supply voltage: AC/DC24.
Temperature indiicator and measurement of various processes K3HB-XAA-L2AT11 AC/DC24.
Action determine the color, can switch the green / Red 2 kinds of color display.
High speed sampling of 50 /s (20ms).
0.01 degree: platinum temperature resistance body Pt100 higgh resolution K3HB-XAA-L2AT11 AC/DC24.
Thermocouple sensor (full range) to support the resolution of 0.1.
The temperature input compensation can be easily set by 2 points.
D

...More relevant models >>>>