Home
>> Products
>> OMRON
>> Power/other peripheral devices
>> Power / equipment protection equipment
>> High pressure electric equipment
>> K2GS-BT-R2 | OMRON Ground directional relay series K2GS-BT-R2
K2GS-BT-R2 | OMRON Ground directional relay series K2GS-BT-R2
OMRON K2GS-BT-R2 Product information and technical parameters：
Brand: OMRON
Name: Ground directional relay series
Model: K2GS-BT-R2
A collection of shell: the shell embedded R2 shell.
Purpose: high voltage non grounding system.
Static ground directional relay K2GS-B type,
Advanced ground direction relay corresponding to the diversification of ground fault.
Feeder priority cut-off function for coordinated multi segment setting.
Prevention of low frequency vibration with other circuit accidents,
Circuit for locking circuit and preventing effect of electric wave caused by false action,
In order to improve the reliability.
The coordination device for the zero phase action voltage is set up,
Therefore, the influence of the residual voltage can be avoided.
Due to the built-in filter, so in the event of the occurrence of the ramp wave input can also maintain a stable role,
Because of the signal level detection, it is easy to carry out the action experiment and set up the confirmation.
Power rating: 35 W.
Input voltage: 100 to 240 VAC (allowable range: 85 to 264 VAC or 120 to 370 VDC*1).
Output voltage: 24 V VDC.
Output current: 1.5 A.
Built-in fan: None.
Model with terminal block facing forward.
High Reliability at a Reasonable Cost.
Reliable, Basic Power Supplies That,
Contribute to Stable Equipment Operation OMRON K2GS-BT-R2.
High Reliability: Enhanced abnormal overvoltage,
resistance and lightning surge resistance for stable,
operation even with an unstable input voltage K2GS-BT-R2
Long Life: Japanese 105°C electrolytic capacitors are used,
to achieve stable quality and long life. A reliable 3-year warranty.
Wide Input Ranges: 100 to 120 VAC and 200 to 240 VAC,
Full Lineup: Models are available for the main output,
voltages and capacities used in FA applications OMRON K2GS-BT-R2.
Global Standards: Conforms to CE (all models),
Approved for UL (all models) and CCC (15 to 150-W models).
Easy mounting to DIN Rails with Mounting Brackets (sold separately).
Refer to Period and Terms of W. No. of digits: 4.
Display color: Red.
Input method: Static.
Logic: Negative.
Display contents: Numerals and units OMRON K2GS-BT-R2.
A Series of Three- to Five-digit Digital.
Display Units with a Character Height of,
14 mm. Models available with either red or,
green displays.
Red or green displays with a character height of 14 mm are,
available for a variety of applications and locations.
Miniature design with a 50-mm depth.
Incorporating a connector, thus saving wiring effort.
Connecting to OMRON''s PLCs via dedicated PLC cables (sold separately).
Units and minus symbols are displayed (three- and four-digit model only).
Incorporating a zero suppression function.
The power supply can freely change between 12 and 24 VDC.
CE Markinng K2GS-BT-R2. UL certification approval. Number of input/outputs: 16.
Number of contacts: 20.
I/O: Inputs.
Common Terminals: YES.
Mounted Connector model: XG4A-2031.
Cable Connector model: XG4M-2030-T.
Accelerate Reductions in Factory.
Wiriing and Labor with Screwless K2GS-BT-R2.
Terminals.
Clamp terminals eliminate the need to tighten screws.
Just insert the ferrule to complete one-touch wiring.
Input voltage: 100 to 240 VAC (allowable range: 85 to 264 VAC or 120 to 370 VDC*1).
Output voltage: 24 V VDC.
Output current: 1.5 A.
Built-in fan: None.
Model with terminal block facing forward.
High Reliability at a Reasonable Cost.
Reliable, Basic Power Supplies That,
Contribute to Stable Equipment Operation OMRON K2GS-BT-R2.
High Reliability: Enhanced abnormal overvoltage,
resistance and lightning surge resistance for stable,
operation even with an unstable input voltage K2GS-BT-R2
Long Life: Japanese 105°C electrolytic capacitors are used,
to achieve stable quality and long life. A reliable 3-year warranty.
Wide Input Ranges: 100 to 120 VAC and 200 to 240 VAC,
Full Lineup: Models are available for the main output,
voltages and capacities used in FA applications OMRON K2GS-BT-R2.
Global Standards: Conforms to CE (all models),
Approved for UL (all models) and CCC (15 to 150-W models).
Easy mounting to DIN Rails with Mounting Brackets (sold separately).
Refer to Period and Terms of W. No. of digits: 4.
Display color: Red.
Input method: Static.
Logic: Negative.
Display contents: Numerals and units OMRON K2GS-BT-R2.
A Series of Three- to Five-digit Digital.
Display Units with a Character Height of,
14 mm. Models available with either red or,
green displays.
Red or green displays with a character height of 14 mm are,
available for a variety of applications and locations.
Miniature design with a 50-mm depth.
Incorporating a connector, thus saving wiring effort.
Connecting to OMRON''s PLCs via dedicated PLC cables (sold separately).
Units and minus symbols are displayed (three- and four-digit model only).
Incorporating a zero suppression function.
The power supply can freely change between 12 and 24 VDC.
CE Markinng K2GS-BT-R2. UL certification approval. Number of input/outputs: 16.
Number of contacts: 20.
I/O: Inputs.
Common Terminals: YES.
Mounted Connector model: XG4A-2031.
Cable Connector model: XG4M-2030-T.
Accelerate Reductions in Factory.
Wiriing and Labor with Screwless K2GS-BT-R2.
Terminals.
Clamp terminals eliminate the need to tighten screws.
Just insert the ferrule to complete one-touch wiring.
...More relevant models >>>>
Last one: OMRON Ground directional relay series K2GS-B Series
next one: OMRON Ground directional relay series K2GS-BP-R2
Related download