OMRON
Home >> Products >> OMRON >> Power/other peripheral devices >> Power / equipment protection equipment >> Protective equipment for equipment >> K2CM-Q2MA | OMRON Motor Protective Relay K2CM-Q2MA

K2CM-Q2MA | OMRON Motor Protective Relay K2CM-Q2MA

OMRON K2CM-Q2MA Manual And Instructions
K2CM-Q2MA datasheetPDF datasheet
K2CM-Q2MA Communications Manual

OMRON K2CM-Q2MA Product information and technical parameters:
Brand: OMRON
Name: Motor Protective Relay
Model: K2CM-Q2MA
Time specification: Instantaneous type.
Current setting range: 20 to 65 A.
Operating voltage: 200/220/240 VAC.
Resetting method: Automatic (See note.).
Solid-state Relay Enables Choice of Three.
Operating Functions (Overcurrent, Open,
phase, and Reverse-phase).
Protects 3-phase induction motors and their loads from damage.
Selection and combination of operating functions from overcur,
rent, open-phase, and reverse-phase.
Circuit and output relay operation can be checked by just operat,
ing the test button.
The set time value can be checked easily because operation time,
is indicated from the start of operation.
Space-saving, integrated construction.
Note: If the K2CM is used with an inverter, the operating conditions will,
depend on the load wiring length, inverter carrier frequency, basic,
frequency, and load conditions. Error will occur in the operating,
values of the overload elements. It is recommended to test operation,
before using the K2CM.

Minimum order: 50.
Material: Brass/nickel plated.
Suitable connector: XS2G/XS2H/XS2M/XS2R/XS2W/XS5H/XS5M/XS5W;
Mounting portion, M12 male screw.
Water- and Environment-resistive FA.
Connectors Save Wiring and Maintenance Effort.
Compact FA connectors meet IP67 requirements and ensure a,
94V-0 fire retardant rating OMRON K2CM-Q2MA.
A wide array of connectors makes a wiring system more modular,
simplifies maintenance, and reduces downtime K2CM-Q2MA
Connectors with Cables and Connector Assemblies are available.
Three types of Connector Assembly: Crimping, soldering, and screw-on.
Connectors with Cables are UL certified.
Based on IEC61076-2-101 (IEC60947-5-2) and NECA 4202. Rated voltage: 115 V .
Permitted voltage fluctuation range: 85% to 110% rated voltage OMRON K2CM-Q2MA.
Frequency: 50/60 Hz.
Rated current: 50 Hz, 0.150 A; 60 Hz, 0.130 A .
Rated input: 50 Hz, 12 W; 60 Hz, 11 W.
Rated rotational speed: 50 Hz, 2500 r/min; 60 Hz, 3000 r/min.
Maximum flow rate: 50 Hz, 0.5 m3/min; 60 Hz, 0.6 m3/min.
Maximum static pressure: 50 Hz, 34.0 Pa; 60 Hz, 49.0 Pa.
Noise: 50 Hz, 33 dB; 60 Hz, 36 dB.
Optimum Cooling with a Comprehensive OMRON K2CM-Q2MA.
Lineup of Axial Fans.
Low noise level, long service life, and resistance to the,
environment.
Shaft supported by ball bearings for highly-reliable operation.
Plastic-bladed models (44 type) and metal-bladed models,
(28 type) included in series.
R87T-A@A15H-WR Water-resistant AC Axial Fans,
(IP X7 degree of protection) added to series.
CE marking compliant and certified by UL and CSA.
Note: The compliant standards and certified safety standards depend on the,
product. Check the information given for available models of Axial fans and,
the information in Characteristics. Pitch: 22 mm.
Applicable models: PYF08A.
Specifications: Max. carry current: 20 A (18 A at 70°C),
Ambient operating temperature: -40 to 70°C (with nocing or condensation),
Ambient operating hummidity: 45% to 85% (with nocing or condensation),
Conductor material: Brass K2CM-Q2MA.
Conductor surface treatment: Nickel plating.
Package qty: 10/bag.
A Wide Variety of Square and,
Round Sockets in Front-mounting,
and Back-mounting Models,,
Models available with finger protection K2CM-Q2MA.
Hold-down Clips and Socket Bridges for PYF Sockets,
are also available.
New screwless models available.


...More relevant models >>>>