OMRON
Home >> Products >> OMRON >> Relay >> Solid-state relay >> Solid state relay for heater >> G3PA-450B-VD-2 DC12-24 | OMRON Solid State Relays G3PA-450B-VD-2 DC12-24

G3PA-450B-VD-2 DC12-24 | OMRON Solid State Relays G3PA-450B-VD-2 DC12-24

OMRON G3PA-450B-VD-2 DC12-24 Manual And Instructions
G3PA-450B-VD-2 DC12-24 datasheetPDF datasheet

OMRON G3PA-450B-VD-2 DC12-24 Product information and technical parameters:
Brand: OMRON
Name: Solid State Relays
Model: G3PA-450B-VD-2 DC12-24
Isolation: Phototriac coupler.
Zero cross function: Yes.
Indicator: Yes.
Rated output load: 50 A at 200 to 480 VAC.
Rated input voltage: 12 to 24 VDC.
Extremely Thin Relays Integrated with Heat Sinks.
Downsizing achieved through optimum design of heat sink.
Mounting possible via screws or via DIN track.
Close mounting possible for linking terminals.
(Except for G3PA-260B-VD and G3PA-450B-VD-2.)
Applicable with 3-phase loads.
Replaceable power element cartridges.
Comply with VDE 0160 (finger protection),
with a dielectric strength of 4,000 V between input and load.
Certified by UL, CSA, and VDE (reinforced insulation).

Construction: insert / solder terminal.
Contact form: 3PDT.
Indicator: no light.
Note: when the order is ordered, the number of the models is added with the rated voltage of the coil.
For example: DC12 DC12, LY1-J on behalf of the rated voltage of the coil.
Arc barrier equipped with high insulation strength (AC2000V) OMRON G3PA-450B-VD-2 DC12-24. Type: DC-switching with built-in diode.
Contact form: DPDT G3PA-450B-VD-2 DC12-24
Cased: Plug-in (octal pins)terminals.
Stable Contact Reliability and Long Life.
Easy to mount, wire, and use.
A large selection of models including various contact forms,
DC-switching models, and open models.
Mechanical life: 5,000,000 operations; electrical life,
(under rated load): 500,000 operations.
Models also available with built-in diodes and for use as,
auxiliary power relays OMRON G3PA-450B-VD-2 DC12-24. High-precision Control with Easy Setup,
Precise heater burnout detection.
Set value and present value monitoring with indicators.
Phase control or optimum cycle control.
RS-485 communications to set manipulated variables and,
monitor load current.
Total run time monitoring.
Output modes for phase control: proportional to phase angle,
proportional to voltage, proportional to square voltage,
and constant-current control OMRON G3PA-450B-VD-2 DC12-24.
Application with various loads: constant load resistance,
variable load resistance.
UL, and IEC/EN (TÜV) certified. Structure: Relays with Plug-in Terminals, With operation indicators.
Classification: Standard models Compliance with Electrical,
Appliances and Material Safety Act.
Number of poles: 1.
Power-switching Compact.
General-purpose Relays.
The standard models include models that are,
compliant with the UL, CSA, and SEV safety.
standards and with the Electrical Appliances and,
Material Safety Act.
Equipped with an arc barrier for arc interruption.
Withstand voltages up to 2,000 V.
New built-in diode and built-in CR circuit models have,
joined the series.
The lineup also incluudes models that are compliant,
with the LR and VDE safety standards G3PA-450B-VD-2 DC12-24.
Single-pole and double-pole models have AC4,
ratings and DC2 ratings (operating coil ratings:
100/110 VAC, 110/120 VAC, 200/220 VAC, 220/240 VAC,
and 1100/110 VDC) G3PA-450B-VD-2 DC12-24.
Three-pole and four-pole models have AC4 ratings,
and DC2 ratings (operating coil ratings: 100/110,
VAC, 200/220 VAC and 100/110 VDC).


...More relevant models >>>>