G3H-203SL-VD DC5 | OMRON Solid State Relays G3H-203SL-VD DC5

G3H-203SL-VD DC5 Introduce | G3H-203SL-VD DC5 Catalog / Manual / Instructions / Software download

OMRON G3H-203SL-VD DC5 Manual And Instructions
G3H-203SL-VD DC5 datasheetPDF datasheet

OMRON G3H-203SL-VD DC5 Product information and technical parameters：
Brand: OMRON
Name: Solid State Relays
Model: G3H-203SL-VD DC5
Isolation: Phototriac coupler.
Zero cross function: NO.
Indicator: NO.
Rated output load: 3 A at 100 to 240 VAC *1 .
Rated input voltage: 5 VDC.
New Models with International Standards.
Added to G3H Series (-VD in model number).
Same Profile as LY1 and LY2 Bi-power.
Relays.
Certified by UL, CSA, and VDE (models numbers with a suffix of “-VD”).
Socket type, same size as LY Power Relays.
Operation indicator provided to confirm input,
(models numbers with “N” before the suffix).

Type: Microload.
Latching lever (Test switch): No.
Rated input voltage: DC, 21.
Applicable model: G2RV-SR700/500-AP DC24V, G2RV-SR700/500-AP AC/DC24V.
Global standard size, low profile slim.
I/O relay with width 6.2 mm.
Realized about 25% lower profile than conventional.
products, contributing to further miniaturization of the control panel OMRON G3H-203SL-VD DC5.
Realized opening and closing ability with one pole 6 A slim shape G3H-203SL-VD DC5
Micro load products for one pole 50 mA using Au-plated.
contacts for small load switching also available.
Since G2RV is a transparent case, confirming the state of,
the contact with the naked eye is possible, and easy to,
confirm abnormality on-site (installed location).
Screw terminal is also stocked to meet the screw type needs OMRON G3H-203SL-VD DC5.
Mounted relay uses plug-in terminals that are difficult to,
bend when exchanging. Type: Standard.
Contact form: DPDT+DPST-NO.
Cased: Plug-in (octal pins) terminals.
Mechanically Latching Relays Based on the.
MM Power Relay.
Low power consumption due to mechanical latch for economic operation.
Relays with mixed coil specifications can be produced,
(e OMRON G3H-203SL-VD DC5. g., AC setcoil and DC reset coil).
Operational response fast enough to enable pulse signal power applications.
Ambient operating temperature: –10°C to 55°C. 100-A-max. Leakage Current, No Bleeder.
Resistor Required.
1 mA to 500 mA micro-load switching.
Switch to both AC and DC with no polarity.
Switch for a wide range of voltages; 19.2 to 264 VAC, 19.2 to 125 VDC.
Switch full- and half-wave rectifier AC loads.
Same sizes and terminal arrangements as OMRON Power,
Relay MY Series.
Operating indicator provided.
Switch MY Series (without bleeder resistor).
Superior surge absorption with a built-in varistor.
Optimum SSR to control minute load, valves, and solenoids. Terminal (wire connection): Push-In Plus Terminal.
Applicable output load: DC load.
Zero cross function: --.
Rated input voltage: AC/DC 24V.
Global standard size,
low profile slim I/O relay with width 6.2 mm,
slim I/O solid state relay.
Realized about 25% lower profile than conventional,
products, contributing to further miniaturization of the,
control panel.
Push-In Plus terminal blocks are used to save wiring work,
in comparison with conventional screw terminals.
(Wiring time is reduced by 60%* in comparison with,
traditional screw terminals. G3H-203SL-VD DC5. ).
No screw loosening means maintenance-free application,
realizing high reliability.
Hand-free structure that holds an inserted flat-blade,
screwdriver to achieve easier wiring work for stranded wires.
Screw terminal is also stocked to meet the screw type needs G3H-203SL-VD DC5.
Mounted relay or solid-state relay has a plug-in terminal.
that is difficult to bend at the time of exchange.

...More relevant models >>>>