OMRON
Home >> Products >> OMRON >> Relay >> Solid-state relay >> Solid state relay has the same shape as general relay >> G3B-205S DC4-30 | OMRON Solid state relay G3B-205S DC4-30

G3B-205S DC4-30 | OMRON Solid state relay G3B-205S DC4-30

OMRON G3B-205S DC4-30 Manual And Instructions
G3B-205S DC4-30 datasheetPDF datasheet

OMRON G3B-205S DC4-30 Product information and technical parameters:
Brand: OMRON
Name: Solid state relay
Model: G3B-205S DC4-30
Action indicator: there are.
Applicable load of output: AC100 5A ~ 240V.
Input rated voltage: DC5 ~ 24V.
Insulation: photo coupler.
Zero crossing trigger function.
Socket terminal type with same shape as MK type power relay.
New international standard certification (-VD type).
Achieved UL, CSA, EN (VDE certification) standard certification. (type -VD)
Socket terminal type of same size with MK (2 pole type).
A model with an action indicator to check the status of the input.

Terminal (Wire connection): Screw terminal.
Classification: Standard.
Latching lever (Test switch): Yes.
Rated input voltage: DC, 24V.
Global standard size, low profile slim.
I/O relay with width 6.2 mm.
Realized about 25% lower profile than conventional.
products, contributing to further miniaturization of the control panel OMRON G3B-205S DC4-30.
Realized opening and closing ability with one pole 6 A slim shape G3B-205S DC4-30
Micro load products for one pole 50 mA using Au-plated.
contacts for small load switching also available.
Since G2RV is a transparent case, confirming the state of,
the contact with the naked eye is possible, and easy to,
confirm abnormality on-site (installed location).
Screw terminal is also stocked to meet the screw type needs OMRON G3B-205S DC4-30.
Mounted relay uses plug-in terminals that are difficult to,
bend when exchanging. Classification: Equipped with operation indicator and diode to absorb coil surge.
Contact form: 4PST (long-life).
Mounting method: DIN Track or screw mounting.
Terminals: Phillips screw terminal.
Rated voltage: 5 VDC, 12 VDC, 24 VDC.
Compact Terminal Relay with 4 Independent OMRON G3B-205S DC4-30.
Outputs.
Equipped with four G6B Mini-relays that are compact, highly sen,
sitive, and highly resistant to dielectric surges, and that can switch,
5 amps of power.
Sealed plastic construction used for relays.
Easy wiring with separated input/output terminals.
Special P6B Mounting Socket used to facilitate maintenance,
(except for high-reliability models).
UL and CSA certification for standard models,
(except for high-reliability models).
VDE certification for G6B-4BND/47BND/48BND for 12/24 VDC.
DIN Track mounting, and screw mounting models are available. Isolation: Photo-voltage coupler.
Zero cross function: No.
Indicator: Yes.
Rated output load: 0.5 A at 24 to 240 VAC, 0.5 A at 24 to 110 VDC.
Rated input voltage: 24 VDC.
100-A-max. Leakage Current, No Bleeder.
Resistor Required.
1 mA to 500 mA micro-load switching.
Switch to both AC and DC with no polarity. G3B-205S DC4-30.
Switch for a wide range of voltages; 19.2 to 264 VAC, 19.2 to 125 VDC.
Switch full- and half-wave rectifier AC loads.
Same sizes and terminal arrangements as OMRON Power,
Relay MY Series.
Operating indicator provided.
Switch MY Series (without bleeder resistor) G3B-205S DC4-30.
Superior surge absorption with a built-in varistor.
Optimum SSR to control minute load, valves, and solenoids.


...More relevant models >>>>