OMRON
Home >> Products >> OMRON >> Sensor >> Photoelectric sensor >> photoelectric sensor amplifier built-in >> E3ZM-T88 | OMRON Compact Photoelectric Sensor E3ZM-T88

E3ZM-T88 | OMRON Compact Photoelectric Sensor E3ZM-T88

OMRON E3ZM-T88 Manual And Instructions
E3ZM-T88 datasheetPDF datasheet
E3ZM-T88 INSTRUCTION sheet

OMRON E3ZM-T88 Product information and technical parameters:
Brand: OMRON
Name: Compact Photoelectric Sensor
Model: E3ZM-T88
Sensing method: Through beam (Emitter + Receiver).
Connection method: Connector (M8, 4 pins).
Sensing distance: 0.8 m (apertures built in).
Model: PNP output .
Stainless Steel Housing Ideal for Food Industry PAT Pending.
Strong resistance against detergents, disinfectants, and jet liquid flow.
Product lineup includes BGS Reflective Models and Through-beam,
Models with built-in slits.
Certified by Ecolab Europe.

Small, easy to use.
Detection mode: on the radio.
Shape: horizontal type.
Connection mode: lead wire.
Detection distance: 2 meters of red light.
Output mode: PNP output. Appearance: L-shaped.
Sensing method: Through-beam type (with slot).
Cable length: 2 m.
Sensing distance: 5 mm (slot width).
configuration Output: Light-ON OMRON E3ZM-T88.
Indicator mode: Incident light.
Model: NPN output.
Slim, Compact Photomicrosensor E3ZM-T88
that is still easy to use.
Compact, thin profile enables dense mounting.
Indicator is visible from both sides.
Wide operating voltage range: 5 to 24 VDC. Pressure range: Positive pressure; 0 to 1 MPa.
ON/OFF output: Open collector (two independent outputs).
Linear output: 1 to 5 V OMRON E3ZM-T88.
Model: NPN output.
Pressure Sensor with.
Easy-to-Read LED Display.
Pressure status can be checked at a glance from the,
digital display and bar display.
Measurement pressure prevents incorrect outputs due,
to momentary pressure changes.
Perform automatic teaching simply by teaching pressure,
values for good and bad products.
Industry’s smallest models at just 28 × 28 × 29 mm.
Only in hysteresis mode OMRON E3ZM-T88. Appearance: Shielded, M18.
Sensing distance: 7 mm.
Model: Operation mode, NO.
Proximity Sensor with a Long Screw Length.
Increased tightening strength. Cable protectors,
provided as a standard feature.
Increased indicator visibility.
A milled section for wrench grip on all models.Size: M8, Shielded.
Sensing distance: 2.0 mm.
Connection: M12 connector.
Body material: Stainless steel.
Thread length (overall length): 49 (65).
Output configuration: PNP.
Operation mode NC.
Safe Mounting with Greater.
Sensing Distance.
Ensures a sensing distance approximately 1.5 to 2,
times larger than that of any conventional OMRON Sensor.
Problems such as the collision of workpieces are eliminated.
Full range of stanndard sizes (M8, M12, M18 and,
M30; both long and short barrels) E3ZM-T88.
Modular construction simplifies customization. Appearance: Unshielded, M30.
Sensing distance: 15 mm.
Output configuration: DC 3-wire, NPN.
Model: Operation mode, NO.
Geeneral-purpose Threaded E3ZM-T88.
Capacitive Sensor.
Product lineup with M12, M18, and M30 models.
Fixed sensing distance requires no sensitivity adjustment.


...More relevant models >>>>