OMRON
Home >> Products >> OMRON >> Sensor >> Photoelectric sensor >> photoelectric sensor amplifier built-in >> E3Z-T62-G0 | OMRON Photoelectric switch E3Z-T62-G0

E3Z-T62-G0 | OMRON Photoelectric switch E3Z-T62-G0

OMRON E3Z-T62-G0 Manual And Instructions
E3Z-T62-G0 datasheetPDF datasheet

OMRON E3Z-T62-G0 Product information and technical parameters:
Brand: OMRON
Name: Photoelectric switch
Model: E3Z-T62-G0
E3Z-T62-G0 detection methods: the firing pattern.
Connection mode: wire lead out type (2m) 3.
Detection range: 30m.
Output mode: NPN output.
Achieve small, long distance, save electricity and
Standard type of photoelectric sensor for energy saving

Appearance: L-shaped.
Sensing method: Through beam type (with slot).
Connecting method: Connector model (4 poles).
Sensing distance: 5 mm (slot width).
Operating mode: Dark-ON/Light-ON (2 outputs).
Indicator mode: Incident light.
Model: PNP output.
Built-in connector enables,
downsizing and easier connection OMRON E3Z-T62-G0 .
Protective circuit for safe operation.
A built-in connector minimizes the shape and dimensional,
requirements E3Z-T62-G0
Two outputs: light-ON and dark-ON.
Complete lineup including seven different shapes.
Safer operation with built-in power supply reverse polarity,
protection.
Output overcurrent protection with a thermal shutdown,
circuit (patent pending).
The indicator can be seen from many directions to enable,
installation in more locations OMRON E3Z-T62-G0 .
Connector with lock that mates with commercially available,
connectors. Appearance: Shielded, M30.
Sensing distance: 10 mm.
Output configuration: DC 2-wire (1)-(4) pin arrangement.
Operation mode: NO.
Spatter-resistant Fluororesin,
coated Proximity Sensor.
Superior spatter resistance.
Long Sensing-distance Models added for sensing,
distances up to 15 mm OMRON E3Z-T62-G0 .
Pre-wired Smartclick Connector Models are also available. Size: M12, Shielded.
Sensing distance: 4.0 mm.
Connection: Pre-wired.
Body material: Brass.
Thread length (overall length): 34 (50).
Output configuration: NPN.
Operation mode NC.
Safe Mounting with Greater.
Sensing Distance.
Ensures a sensing distance approximately 1.5 to 2,
times larger than that of any conventional OMRON Sensor.
Problems such as the collision of workpieces are eliminated.
Full range of standard sizes (M8, M12, M18 and,
M30; both long and short barrels).
Modular construction simplifies customization. Size: M8(Stainless steel)(See note 2.); Single; Unshielded.
Sensing distance: 2 mm.
Connecting method (See note 1.): M8 Connector (3-pin).
Body length: Long.
Output configuration: NPN.
Operation mode NC.
A new generation in global applicationns E3Z-T62-G0 . Connection method: Pre-wired.
Cable length: 5 m.
Sensing distance: 50 ± 10 mm.
Model: PNP output.
A CMOS Laser Sensor That’s.
Optimum for Simple Measurements.
A resolution of 0.002 mm that’s suitable for simple measure ments.

Stable measurements for any type of workpiece E3Z-T62-G0 .
Models available with four different distance specifications.
Long-distance model for up to 1,000 mm.


...More relevant models >>>>