Home
>> Products
>> OMRON
>> Sensor
>> Fiber sensor
>> fiber amplifier
>> E3X-DA21R-S 2M | OMRON Digital Fiber Amplifier Unit E3X-DA21R-S 2M
E3X-DA21R-S 2M | OMRON Digital Fiber Amplifier Unit E3X-DA21R-S 2M
OMRON E3X-DA21R-S 2M Product information and technical parameters：
Brand: OMRON
Name: Digital Fiber Amplifier Unit
Model: E3X-DA21R-S 2M
Type: Ultra-long-term APC models.
Connecting method: Pre-wired (2 m).
Model: NPN output.
Applicable wire-saving connector(sold separately): Type,--; Model,--.
Stable Detection with Advanced Fiber.
Amplifier Units.
A wide range of added value with standard models with one,
input and two outputs, and ultra-long-term APC models with an,
APC life of approximately 20 years.
Power turning to easily set the optimum light level.
Automatic Power Control (APC) is always enabled to stabilize,
emitter power with high accuracy.
GIGA RAY for stable detection with the highest level of power in,
this class even for low-reflective objects and large objects.
The E3X-DA0-S supports an EtherCAT Sensor Communications,
Unit or CompoNet Sensor Communications Unit.
Power supply voltage: AC/DC power supply selectable type.
Sensing method: Diffuse-reflective.
Sensing distance: 300 mm.
Output configu ration: Relay.
Long-distance Photoelectric Sensor.
That Supports AC/DC Power Supplies.
Long sensing distance that is approximately 8,
times that of our conventional model (for the,
Through-beam and Diffuse-reflective models) OMRON E3X-DA21R-S 2M.
(Through-beam: 40 m, Retro-reflective: 7 m, and,
Diffuse-reflective: 2 E3X-DA21R-S 2M5 m.) .
Improved visibility:
A red LED that makes the spot visible.
Large indicators that can be seen even from a,
distance.
Improved operability.
(Enlarged sensitivity adjuster and operation selector)
Freely selectable power supply input (24 to 240 VDC, 24 to 240 VAC) OMRON E3X-DA21R-S 2M.
(Additional types added to the DC type lineup.)
Models with infrared LEDs are also available. E32-T16P type: special beam type; region detection,
Specialty: regional width 11mm,
Shape / detection distance (mm): 1500; 1100; 750 (300),
Bending radius (mm): R10.
Standard test object (minimum test object) (mm) 1: (0.2) 3,
Fiber element for meeting diversified needsImproved Durability with OMRON E3X-DA21R-S 2M.
Stainless Steel Sensing.
Head.
Models with improved spatter resistance ideal,
for welding also available. Appearance: Unshielded, M18.
Sensing distance: 10 mm [6 to 10 mm *].
Output Model: DC 3-wire NPN.
Operation mode: NC.
Fluororesin-coated Capacitive.
Sensor with Sensitivity Adjuster.
Excellent resistance against chemicals and oil with fluororesin,
coated case.
Distance adjustment according to the sensing object using the,
sensitivity adjuster. Item: Parallel cable for ZW-CE1@T 32-pole,
(included with Controller ZW-CE1@T).
Cable length: 2m.
To achieve a compact Sensor Head and high-resolution measurements,
the ZW Series uses a white light confocal principle to detect objects.
Thiss principle is described below E3X-DA21R-S 2M. Appearance: Shielded, M18.
Sensing distance: 4 mm.
Output configuration: DC 2-wire, (3)-(4) pin arrangement.
Model: Operation mode, NO.
Chip-immune Inductive.
Proximity Sensor.
Correct operation eeven with aluminum or iron chips sticking,
to the Sensor E3X-DA21R-S 2M.
Only the sensing object is detected.
Pre-wired Smartclick Connector Models also available.
Sensing method: Diffuse-reflective.
Sensing distance: 300 mm.
Output configu ration: Relay.
Long-distance Photoelectric Sensor.
That Supports AC/DC Power Supplies.
Long sensing distance that is approximately 8,
times that of our conventional model (for the,
Through-beam and Diffuse-reflective models) OMRON E3X-DA21R-S 2M.
(Through-beam: 40 m, Retro-reflective: 7 m, and,
Diffuse-reflective: 2 E3X-DA21R-S 2M5 m.) .
Improved visibility:
A red LED that makes the spot visible.
Large indicators that can be seen even from a,
distance.
Improved operability.
(Enlarged sensitivity adjuster and operation selector)
Freely selectable power supply input (24 to 240 VDC, 24 to 240 VAC) OMRON E3X-DA21R-S 2M.
(Additional types added to the DC type lineup.)
Models with infrared LEDs are also available. E32-T16P type: special beam type; region detection,
Specialty: regional width 11mm,
Shape / detection distance (mm): 1500; 1100; 750 (300),
Bending radius (mm): R10.
Standard test object (minimum test object) (mm) 1: (0.2) 3,
Fiber element for meeting diversified needsImproved Durability with OMRON E3X-DA21R-S 2M.
Stainless Steel Sensing.
Head.
Models with improved spatter resistance ideal,
for welding also available. Appearance: Unshielded, M18.
Sensing distance: 10 mm [6 to 10 mm *].
Output Model: DC 3-wire NPN.
Operation mode: NC.
Fluororesin-coated Capacitive.
Sensor with Sensitivity Adjuster.
Excellent resistance against chemicals and oil with fluororesin,
coated case.
Distance adjustment according to the sensing object using the,
sensitivity adjuster. Item: Parallel cable for ZW-CE1@T 32-pole,
(included with Controller ZW-CE1@T).
Cable length: 2m.
To achieve a compact Sensor Head and high-resolution measurements,
the ZW Series uses a white light confocal principle to detect objects.
Thiss principle is described below E3X-DA21R-S 2M. Appearance: Shielded, M18.
Sensing distance: 4 mm.
Output configuration: DC 2-wire, (3)-(4) pin arrangement.
Model: Operation mode, NO.
Chip-immune Inductive.
Proximity Sensor.
Correct operation eeven with aluminum or iron chips sticking,
to the Sensor E3X-DA21R-S 2M.
Only the sensing object is detected.
Pre-wired Smartclick Connector Models also available.
...More relevant models >>>>
Last one: OMRON Digital Fiber Amplifier Unit E3X-DA7-S
next one: OMRON Digital Fiber Amplifier Unit E3X-DA7R-S
Related download