E3S-AD31 | OMRON Built-in Amplifier Photoelectric Sensor E3S-AD31

E32-D16 type: special beam type; long range / high function,
Specialty: built-in large lens screw mounting,
Bending radius (mm): B; R4.
Standard test object (minimum test object) (mm) 1: (0.005),
Fiber element for meeting diversified needsAppearance: T-shaped, slot center 10 mm.
Sensing method: Through beam type (with slot) OMRON E3S-AD31.
Connecting method: Connector model (4 poles).
Sensing distance: 5 mm (slot width) E3S-AD31
Operating mode: Dark-ON/Light-ON (2 outputs).
Indicator mode: Incident light.
Model: NPN output.
Built-in connector enables,
downsizing and easier connection.
Protective circuit for safe operation.
A built-in connector minimizes the shape and dimensional,
requirements.
Two outputs: light-ON and dark-ON OMRON E3S-AD31.
Complete lineup including seven different shapes.
Safer operation with built-in power supply reverse polarity,
protection.
Output overcurrent protection with a thermal shutdown,
circuit (patent pending).
The indicator can be seen from many directions to enable,
installation in more locations.
Connector with lock that mates with commercially available,
connectors OMRON E3S-AD31. Sensing method: Through-beam type (with slot).
Sensing distance: 3.6 mm (slot width).
Output type: NPN output.
Output configuration: Light-ON.
Photomicrosensor with light,
modulation for reduced external,
light interference and a,
connector for easy maintenance.
Built-in connectors.
Select from four easy-to-use shapes for efficient space,
utilization.
Connectors with locks for safety against vibration.
Convenient mounting method using M3 screws.
Wide operating voltage range: 5 to 24 VDC. Output configuration: DC 3-wire, NPN, Open-collector output.
Flat Capacitive Sensor with Separate.
Amplifier.
Ideal ffor Mounting on Robot Hands E3S-AD31.
Flat head is only 5.5-mm thick.
Robotics cable ensures improved flexibility.
Operation indicator on the Sensor.
Easy-to-use connector. Sensing method: Retro-reflective Sensors.
Appearance: Horizontal.
Connnection method: Pre-wired E3S-AD31.
Sensing distance: 7 m.
Functions: --.
Model: NPN output.
Ordering Information.
Built-in Amplifier Photoelectric Sensors.