OMRON
Home >> Products >> OMRON >> Sensor >> Photoelectric sensor >> Photoelectric sensor power built-in type >> E3JK-DS30M2 | OMRON AC and DC type photoelectric switch (power supply) E3JK-DS30M2

E3JK-DS30M2 | OMRON AC and DC type photoelectric switch (power supply) E3JK-DS30M2

OMRON E3JK-DS30M2 Manual And Instructions
E3JK-DS30M2 datasheetPDF datasheet

OMRON E3JK-DS30M2 Product information and technical parameters:
Brand: OMRON
Name: AC and DC type photoelectric switch (power supply)
Model: E3JK-DS30M2
E3JK-DS30M2 detection method: diffuse reflection type,
Connection mode: lead wire,
Detection range: 300mm.
Output status: shading ON.
Output: relay,
2 types of cost reduction

Appearance: Shielded, M18.
Sensing distance: 7 mm.
Model: Operation mode, NC.
Proximity Sensor with a Long Screw Length.
Increased tightening strength. Cable protectors,
provided as a standard feature.
Increased indicator visibility.
A milled section for wrench grip on all models.Size: Shielded, M12 OMRON E3JK-DS30M2.
Sensing distance: 2 mm.
Output: DC 2-Wire (polarity).
Operation mode: NO E3JK-DS30M2
Highly Durable Proximity Sensor for.
Tough Environments.
Completely stainless-steel housing.
Aluminum chip immunity.
Embedding installation to metal (steel) fittings.
Chemical resistance certified by Ecolab Europe.
Lineup includes pre-wire models and DC 3-wire NPN output,
models with fluororesin coating OMRON E3JK-DS30M2. E32-A03 type: special beam type; wafer mapping,
Specialty: opening angle 1.5 degree adjustment of the optical axis after the factory,
Bending radius (mm): R1.
Fiber element for meeting diversified needsSensing method: Diffuse reflective.
Connection method: Pre-wired (2 m).
Sensing distance: 1m.
Model: PNP output .
Stainless Steel Housing Ideal for Food Industry PAT Pending.
Strong resistance against detergents, disinfectants, and jet liquid flow OMRON E3JK-DS30M2.
Product lineup includes BGS Reflective Models and Through-beam,
Models with built-in slits.
Certified by Ecolab Europe.
Appearance: Unshielded.
Sensing surface: Front.
Sensing distance: 1.6 mm.
Output configuration: NPN.
Model: Operation mode, NC.
Advanced Performance and Wide.
Range of Selections in a Super.
compact Size.
Only 5.5 × 5.5 mm with a built-in Amplifier.
Maximum sensing distance: 2.5 mm. Stable detection even with,
workpiece fluctuations.
Response frequency: 1 kHz.
Low current consumption. Measurement range: 5 mm.
Output specifications: 4 to 20 mA.
Actuator: Flat type (See note 1.).
Resolution: 10 µm.
Contact Displacement Sensor with Built-in.
Amplifier That Enables In-line Measurement.
of a Wide Range of Objects with a Low.
Operating Force.
Works with a low operating force (0.29 N) to detect aa wide vari,
ety of objects including glass, plastic, and rubber objects E3JK-DS30M2.
Models with digital output for B7A Units and models with 4- to,
20-mA linear output corresponding to the 0- to 5-mm measure,
ment range are available.
Models with ball-, flat-, or pin-type actuators are available for a,
wide variety of objects E3JK-DS30M2.
The XS3 Sensor I/O Connector makes Sensor connections simple.


...More relevant models >>>>