OMRON
Home >> Products >> OMRON >> Sensor >> Photoelectric sensor >> photoelectric sensor amplifier built-in >> E3FA-DN22 | OMRON Photoelectric sensors E3FA-DN22

E3FA-DN22 | OMRON Photoelectric sensors E3FA-DN22


OMRON E3FA-DN22 Product information and technical parameters:
Brand: OMRON
Name: Photoelectric sensors
Model: E3FA-DN22
Sensor type: Diffuse-reflective.
Sensing distance: 300 mm.
Connection method: M12 connector.
Model: NPN output.
A new generation in sensing performance.
Simplicity.
Simple selection.
Simple installation.
One family for all.
All standard applications covered.
A wide variety of models.
Models designed for special applications.
Non-stop detection.
High quality and reliability.
High EMC protection.
High light immunity.
Robust and waterproof housing.

Type: Wide View.
Setting distance: 66 to 141 mm (variable).
Sensing area: 50 X 46 mm (H X V) to 90 X 83 mm (H X V).
Degree of protection: IP65.
Simple to use.
Detection abilities close to human vision.
One-touch automatic setting for stable detection.
2.2-inch monitor integrated in compact housing OMRON E3FA-DN22.
Sensor Heads with field of view up to 150 mm. Sensing distance: (See note 2 E3FA-DN22)0 to 3.5 mm(pressed position) (See note 1.).
Sensing method: Pushbutton.
Operation mode: ON with no load.
Cable length: 1 m.
Model: PNP output .
Using a pushbutton enables,
accurately detecting difficult-to-detec objects.
Conforms to standards for semiconductor FOUP cassettes to ena,
accurately detecting FOUP cassettes without being affected by the,
material, color, or reflectance of the bottoms of the cassettes OMRON E3FA-DN22.
Thin design enables mounting in a wider range of applications, e.g.,
on transfer arms.
Increased visibility with 4-direction indicator.
Optical detection of actuator operation provides a long life,
(mechanical life: 5 million operations min.).
Models available with PNP or NPN output OMRON E3FA-DN22.
Models are available with very flexible robot cable. Long-distance Model with a Sensing,
distance of 50 mm. Type: Ultra-long-term APC models.
Connecting method: Wire-saving connector *1.
Model: NPN output.
Applicable wire-saving connector(sold separately):
Type,Master connector, Slave connector; Model, E3X-CN21, E3X-CN22.
Stable Detection with Advanced Fiber.
Amplifier Units.
A wide range of added value with standard models with one,
input and two outputs, and ultra-long-term APC models with an,
APC life of approximately 20 yearss E3FA-DN22.
Power turning to easily set the optimum light level.
Automatic Power Control (APC) is always enabled to stabilize,
emitter power with high accuracy.
GIGA RAY for stable detection with the highest level of power in,
this class even for low-reflective objects and large objects E3FA-DN22.
The E3X-DA0-S supports an EtherCAT Sensor Communications,
Unit or CompoNet Sensor Communications Unit.


...More relevant models >>>>