E3C-LS3R | OMRON Photoelectric sensor E3C-LS3R

Item: Water-resistant models.
Connection method: Pre-wired (2 m).
Ratings and Specifications: Degree of protection: IP66.
Model: NPN output.
Simple and Affordable Fiber Amplifier Units.
Reasonable price.
Use the one-key one-function feature for quick,
easy operation.
GIGA RAY for the highest level of power in this class for,
stable detection even with sensing objects with low OMRON E3C-LS3R E3C-LS3R
reflection or large sensing objects. Size: M8, Non-shielded.
Sensing distance: 4.0 mm.
Connection: M12 connector.
Body material: Brass.
Thread length (overall length): 27 (43).
Output configuration: NPN.
Operation mode NC.
Safe Mounting with Greater.
Sensing Distance.
Ensures a sensing distance approximately 1 OMRON E3C-LS3R. 5 to 2,
times larger than that of any conventional OMRON Sensor.
Problems such as the collision of workpieces are eliminated.
Full range of standard sizes (M8, M12, M18 and,
M30; both long and short barrels).
Modular construction simplifies customization. E3JK-DS30S3 detection method: diffuse reflection type,
Connection mode: lead wire,
Detection range: 300mm.
Output state: when the light into the ON; light shading ON OMRON E3C-LS3R.
Output: DC no contact,
2 types of cost reductionAppearance: Close mounting.
Sensing method: Throughbeam type(with slot).
Connecting method: Connector(4 poles).
Sensing distance: 5 mm (slot width).
Output configuration: Dark-ON/Light-ON (selectable).
Indicator mode: No incident light.
Model: PNP output.
Global Standard Slot-type.
photomicrosensors with 50- to,
100-mA direct switching capacity.
Series includes models that enable switching between,
dark-ON and light-ON operation.
Response frequency as high as 1 kHz.
Easy operation monitoring with bright light indicator.
Wide operating voltage range: 5 to 24 VDC.
Models in which the light indicator turns ON for dark-ON,
operation are also available.
A wide range of variations in eight different shapes.
Flexible robot cable is provided as a standard feature. Sensing method: Through-beam typpe E3C-LS3R.
Sensing distance(slot width): 3.6 mm.
Output type: NPN output.
Output configuration: Light-ON.
Cable length: 1 m.
Photomicrosensor with built-in,
amplifier and attached cable reduces,
external light interference.
Light modulatioon effectively reduces external light interference E3C-LS3R.
Wide operation voltage range: 5 to 24 VDC.
Easy operation monitoring with bright light indicator.