Home
>> Products
>> OMRON
>> Sensor
>> Fiber sensor
>> fiber head
>> E32-A01 | OMRON Optical fiber sensor E32-A01
E32-A01 | OMRON Optical fiber sensor E32-A01
OMRON E32-A01 Manual And Instructions
E32-A01 datasheetPDF datasheet
OMRON E32-A01 Product information and technical parameters：
Brand: OMRON
Name: Optical fiber sensor
Model: E32-A01
E32-A01 type: special beam type; liquid level detection,
Specialty: when there is liquid into the light, not susceptible to the effects of bubbles and water droplets,
Bending radius (mm): R4.
Fiber element for meeting diversified needs
...More relevant models >>>>
E32-A01 datasheetPDF datasheet
OMRON E32-A01 Product information and technical parameters：
Brand: OMRON
Name: Optical fiber sensor
Model: E32-A01
E32-A01 type: special beam type; liquid level detection,
Specialty: when there is liquid into the light, not susceptible to the effects of bubbles and water droplets,
Bending radius (mm): R4.
Fiber element for meeting diversified needs
Field of view: Wide View (Short-distance).
Number of pixels: 350,000 pixels.
Color: NPN.
Field of view/Installation distance: Refer to figure 4 on p.20.
Inspection capabilities, camera options,
and communication options -- this powerful,
heavy weight has it all.
This Vision Sensor provides all of the best-selling,
features found in high-end models without the,
need as in vision system for a separate controller OMRON E32-A01 E32-A01
This new Smart Camera was designed to attract,
potential customers to try the FQ2 Series. Fitting materials: Iron, zinc plating.
Count: 1.
Accessories: Description, Slotted/Phillips screws M4 × 30,
(with spring and plain washers)Nuts M4;
Material, Iron, nickel plating; Count, 2 OMRON E32-A01.
Applicable sensor (mounting pitch on sensor side): E3JM (40).
Page: Dimensions, 7. Power supply voltage: DC.
Sensing method: Through-beam (Emitter + Receiver).
Sensing distance: 5 m.
Output configu ration: PNP.
Long-distance Photoelectric Sensor.
That Supports AC/DC Power Supplies.
Long sensing distance that is approximately 8,
times that of our conventional model (for the,
Through-beam and Diffuse-reflective models) OMRON E32-A01.
(Through-beam: 40 m, Retro-reflective: 7 m, and,
Diffuse-reflective: 2.5 m.) .
Improved visibility:
A red LED that makes the spot visible.
Large indicators that can be seen even from a,
distance.
Improved operability.
(Enlarged sensitivity adjuster and operation selector)
Freely selectable power supply input (24 to 240 VDC, 24 to 240 VAC).
(Additional types added to the DC type lineup.)
Models with infrared LEDs are also available. Type: Color; PNP; EtherCAT communication function not provided.
Key features and benefits.
Made specifically for pick & place,
applications.
Encoder input for conveyor tracking,
and calibration.
Shape based object detection.
Smart calibration wizard.
Sysmac Studio software for vision E32-A01.
system operation and setting. Appearance: Shielded, M30.
Sensing distance: 10 mm.
Output configuration: DC 2-wire (1)-(4) pin arrangement.
Operation mode: NO.
Spatter-resistant Fluororesin,
coated Proximity Sensor.
Superior sspatter resistance E32-A01.
Long Sensing-distance Models added for sensing,
distances up to 15 mm.
Pre-wired Smartclick Connector Models are also available.
Number of pixels: 350,000 pixels.
Color: NPN.
Field of view/Installation distance: Refer to figure 4 on p.20.
Inspection capabilities, camera options,
and communication options -- this powerful,
heavy weight has it all.
This Vision Sensor provides all of the best-selling,
features found in high-end models without the,
need as in vision system for a separate controller OMRON E32-A01 E32-A01
This new Smart Camera was designed to attract,
potential customers to try the FQ2 Series. Fitting materials: Iron, zinc plating.
Count: 1.
Accessories: Description, Slotted/Phillips screws M4 × 30,
(with spring and plain washers)Nuts M4;
Material, Iron, nickel plating; Count, 2 OMRON E32-A01.
Applicable sensor (mounting pitch on sensor side): E3JM (40).
Page: Dimensions, 7. Power supply voltage: DC.
Sensing method: Through-beam (Emitter + Receiver).
Sensing distance: 5 m.
Output configu ration: PNP.
Long-distance Photoelectric Sensor.
That Supports AC/DC Power Supplies.
Long sensing distance that is approximately 8,
times that of our conventional model (for the,
Through-beam and Diffuse-reflective models) OMRON E32-A01.
(Through-beam: 40 m, Retro-reflective: 7 m, and,
Diffuse-reflective: 2.5 m.) .
Improved visibility:
A red LED that makes the spot visible.
Large indicators that can be seen even from a,
distance.
Improved operability.
(Enlarged sensitivity adjuster and operation selector)
Freely selectable power supply input (24 to 240 VDC, 24 to 240 VAC).
(Additional types added to the DC type lineup.)
Models with infrared LEDs are also available. Type: Color; PNP; EtherCAT communication function not provided.
Key features and benefits.
Made specifically for pick & place,
applications.
Encoder input for conveyor tracking,
and calibration.
Shape based object detection.
Smart calibration wizard.
Sysmac Studio software for vision E32-A01.
system operation and setting. Appearance: Shielded, M30.
Sensing distance: 10 mm.
Output configuration: DC 2-wire (1)-(4) pin arrangement.
Operation mode: NO.
Spatter-resistant Fluororesin,
coated Proximity Sensor.
Superior sspatter resistance E32-A01.
Long Sensing-distance Models added for sensing,
distances up to 15 mm.
Pre-wired Smartclick Connector Models are also available.
...More relevant models >>>>
Last one: 
next one: Related download