Home
>> Products
>> OMRON
>> Sensor
>> Proximity sensor
>> Cylindrical proximity sensor
>> E2G-M30KS10-M1-D1 | OMRON Cylindrical proximity sensor E2G-M30KS10-M1-D1
E2G-M30KS10-M1-D1 | OMRON Cylindrical proximity sensor E2G-M30KS10-M1-D1
OMRON E2G-M30KS10-M1-D1 Product information and technical parameters：
Brand: OMRON
Name: Cylindrical proximity sensor
Model: E2G-M30KS10-M1-D1
High performance price ratio standard type proximity sensor.
Standard cable protector.
The new DC two-wire type.
Non polar proximity sensor.
Type: DC two-wire / connector type.
Polarity: there.
Shape: shield, M30.
Detection range: 10mm.
Action mode: NO.
Absolute diameter 65.
High resolution absolute type for detecting instrument and precision positioning.
To achieve a resolution of 12 bits (maximum 4096) of high resolution.
Response frequency is the high speed response of 40kHz
Output with gray code and BCD code.
The shape is smaller than the old one OMRON E2G-M30KS10-M1-D1. Size: M12 (brass), single distance, non shield type.
Detection range: 5mm E2G-M30KS10-M1-D1
Connection mode: lead type (cable length is 2M and 5m two).
Thread length: Standard type.
Output type: PNP.
Action mode NC.
Set up the new standard of the world economy proximity sensor.
OMRON as a pioneer and leader in proximity sensor industry,
Now bring you a new E2B proximity sensor with high performance to price ratio OMRON E2G-M30KS10-M1-D1.
This series of products are complete,
Aimed at reasonable prices to meet customer demand for high quality and high reliability of the sensor.
We have tested the product not only on the protection level (IP67) specific item,
The oil spray test was carried out on the condition of the work site.
Simulation test was carried out in the environment of high oil mist concentration. Fitting materials: Stainless steel(SUS304) OMRON E2G-M30KS10-M1-D1.
Count: 1 .
Accessories: Description, Slotted/Phillips screws M3 × 8,
(with spring and plain washers);
Material, Stainless steel (SUSXM7), Stainless steel (SUS304);
Count, 2.
Applicable sensor (mounting pitch on sensor side): E3Z pre-wired model.
Page: Dimensions, 14. To make the replacement work simpler and faster.
16 memory cell correspondence.
Amplifier unit for easy connection to ZX series. Sensing method: Through-beam.
Connection method: Pre-wired (2 m).
Sensing distance: 25 mm.
No. of opti- cal axes: 1.
Model: NPN output.
Photoelectric Sensor with Grooved.
Design and Easy Settings .
Groove-type Sensor with groove width of 25 mm.
Models are aavailable with one or two light axes E2G-M30KS10-M1-D1.
Models are available with M8 pre-wired connectors. Appearance: Unshielded, M30.
Sensing distance: 18 mm.
Model: Operation mode, NO.
Proximity Sensor with a Long Screw Length.
Increased tigghtening strength E2G-M30KS10-M1-D1. Cable protectors,
provided as a standard feature.
Increased indicator visibility.
A milled section for wrench grip on all models.
High resolution absolute type for detecting instrument and precision positioning.
To achieve a resolution of 12 bits (maximum 4096) of high resolution.
Response frequency is the high speed response of 40kHz
Output with gray code and BCD code.
The shape is smaller than the old one OMRON E2G-M30KS10-M1-D1. Size: M12 (brass), single distance, non shield type.
Detection range: 5mm E2G-M30KS10-M1-D1
Connection mode: lead type (cable length is 2M and 5m two).
Thread length: Standard type.
Output type: PNP.
Action mode NC.
Set up the new standard of the world economy proximity sensor.
OMRON as a pioneer and leader in proximity sensor industry,
Now bring you a new E2B proximity sensor with high performance to price ratio OMRON E2G-M30KS10-M1-D1.
This series of products are complete,
Aimed at reasonable prices to meet customer demand for high quality and high reliability of the sensor.
We have tested the product not only on the protection level (IP67) specific item,
The oil spray test was carried out on the condition of the work site.
Simulation test was carried out in the environment of high oil mist concentration. Fitting materials: Stainless steel(SUS304) OMRON E2G-M30KS10-M1-D1.
Count: 1 .
Accessories: Description, Slotted/Phillips screws M3 × 8,
(with spring and plain washers);
Material, Stainless steel (SUSXM7), Stainless steel (SUS304);
Count, 2.
Applicable sensor (mounting pitch on sensor side): E3Z pre-wired model.
Page: Dimensions, 14. To make the replacement work simpler and faster.
16 memory cell correspondence.
Amplifier unit for easy connection to ZX series. Sensing method: Through-beam.
Connection method: Pre-wired (2 m).
Sensing distance: 25 mm.
No. of opti- cal axes: 1.
Model: NPN output.
Photoelectric Sensor with Grooved.
Design and Easy Settings .
Groove-type Sensor with groove width of 25 mm.
Models are aavailable with one or two light axes E2G-M30KS10-M1-D1.
Models are available with M8 pre-wired connectors. Appearance: Unshielded, M30.
Sensing distance: 18 mm.
Model: Operation mode, NO.
Proximity Sensor with a Long Screw Length.
Increased tigghtening strength E2G-M30KS10-M1-D1. Cable protectors,
provided as a standard feature.
Increased indicator visibility.
A milled section for wrench grip on all models.
...More relevant models >>>>
Last one: OMRON Cylindrical proximity sensor E2G-M18KS07-M1-D1
next one: OMRON Cylindrical proximity sensor E2G-S08KN04-M1-D1
Related download