E2FM-X10D1 2M | OMRON Proximity Sensor with All-stainless Housing E2FM-X10D1 2M

E2FM-X10D1 2M Introduce | E2FM-X10D1 2M Catalog / Manual / Instructions / Software download

OMRON E2FM-X10D1 2M Manual And Instructions
E2FM-X10D1 2M datasheetPDF datasheet

OMRON E2FM-X10D1 2M Product information and technical parameters：
Brand: OMRON
Name: Proximity Sensor with All-stainless Housing
Model: E2FM-X10D1 2M
Size: Shielded, M30.
Sensing distance: 10 mm.
Output: DC 2-Wire (polarity).
Operation mode: NO.
Highly Durable Proximity Sensor for.
Tough Environments.
Completely stainless-steel housing.
Aluminum chip immunity.
Embedding installation to metal (steel) fittings.
Chemical resistance certified by Ecolab Europe.
Lineup includes pre-wire models and DC 3-wire NPN output,
models with fluororesin coating.

Appearance: Unshielded, M18.
Sensing distance: 10 mm.
Model: Operation mode, NO.
Proximity Sensor with a Long Screw Length.
Increased tightening strength. Cable protectors,
provided as a standard feature.
Increased indicator visibility.
A milled section for wrench grip on all models. Appearance: L-shaped OMRON E2FM-X10D1 2M.
Sensing method: Through beam type (with slot).
Connecting method: Connector model (4 poles) E2FM-X10D1 2M
Sensing distance: 5 mm (slot width).
Operating mode: Dark-ON/Light-ON (2 outputs).
Indicator mode: Incident light.
Model: NPN output.
Built-in connector enables,
downsizing and easier connection.
Protective circuit for safe operation.
A built-in connector minimizes the shape and dimensional,
requirements OMRON E2FM-X10D1 2M.
Two outputs: light-ON and dark-ON.
Complete lineup including seven different shapes.
Safer operation with built-in power supply reverse polarity,
protection.
Output overcurrent protection with a thermal shutdown,
circuit (patent pending).
The indicator can be seen from many directions to enable,
installation in more locations.
Connector with lock that mates with commercially available,
connectors OMRON E2FM-X10D1 2M. E32-TC200E type: standard type; standard,
Specialty: M3 screws (small),
Shape / detection distance (mm): 270; 220; 125 (50),
Bending radius (mm): R10.
Standard test object (minimum test object) (mm) 1: 1 (0.0005),
Fiber element for meeting diversified needsAppearance: Standard.
Sensing method: Through-beam type (with slot).
Cable length: 2 m.
Sensing distance: 5 mm (slot width).
configuration Output: Light-ON.
Indicator mode: No incident light.
Model: PNP output.
Slim, Compact Photomicrosensor.
that is still easy to use.
Compact, thin profile enables dense mounting.
Indicator is visible from both sides.
Wide operating voltage range: 5 to 24 VDC. Size: M18, Non-shielded.
Sensing distance: 16.0 mm.
Connection: M12 connector.
Body material: Brass.
Thread length (overall length): 39 (53).
Output configurration: PNP E2FM-X10D1 2M.
Operation mode NC.
Safe Mounting with Greater.
Sensing Distance.
Ensures a sensing distance approximately 1.5 to 2,
times larger than that of any conventional OMRON Sensor.
Problems such as the collision of workpiecees are eliminated E2FM-X10D1 2M.
Full range of standard sizes (M8, M12, M18 and,
M30; both long and short barrels).
Modular construction simplifies customization.

...More relevant models >>>>