E2B-M30LS10-M1-C2 | OMRON Proximity Sensors E2B-M30LS10-M1-C2

Category: General purpose,
Control output: ON/OFF output,
Output mode: NPN output,
Simple and perfect optical fiber amplifier products,
High anti interference with optoelectronic IC technologyHigh performance price ratio standard type proximity sensor.
Standard cable protector.
The new DC two-wire type OMRON E2B-M30LS10-M1-C2.
Non polar proximity sensor.
Type: DC / wire type.
Polarity: none.
Shape: non shield, M12 E2B-M30LS10-M1-C2
Detection range: 8mm.
Action mode: NC. Size: M12 (Brass); Double; Unshielded.
Sensing distance: 30 mm.
Connecting method (See note 1.): M12 Connector.
Body length: Short.
Output configuration: PNP.
Operation mode NC.
A new generation in global applications. E32-A03-1 type: special beam type; wafer mapping,
Specialty: the opening angle of 1 OMRON E2B-M30LS10-M1-C2. 5 degrees to adjust the optical axis after the factory; with the installation edge,
Bending radius (mm): R10.
Fiber element for meeting diversified needsSize: M12, Shielded.
Sensing distance: 4.0 mm.
Connection: M12 connector.
Body material: Brass.
Thread length (overall length): 56 (70).
Output configuration: NPN.
Operation mode NC.
Safe Mounting with Greater OMRON E2B-M30LS10-M1-C2.
Sensing Distance.
Ensures a sensing distance approximately 1.5 to 2,
times larger than that of any conventional OMRON Sensor.
Problems such as the collision of workpieces are eliminated.
Full range of standard sizes (M8, M12, M18 and,
M30; both long and short barrels).
Modular construction simplifies customization. Power supply: 24 VDC.
Output type: NPN.
ZG2 debut!
Achieving stable measurement.
through innovative technology. Size: Shielded, M18.
Sensing distance: 5 mm.
Model: Output configuration: NPN NC.
Highly Durable Proximity Sensor for.
Tough Environments.
Completely stainless-steel housing.
Aluminum chip immunity.
Embedding installation to metal (steel) fittings.
Chemical resistance certified by Ecolab Europe.
Lineup includes pre-wire models and DC 3-wire NPN output,
models with fluororesin coating. Sensing method: Through beam.
Connection method (cable length): Pre-wired (2 m).
Sensing distance: 300 mm.
Beams: Gap, 25 mm; Qty, 3.
Sensingwidth: 50 mm.
Output type: PNP open collector.
Compact Body, High-visibility E2B-M30LS10-M1-C2.
Indicators, and Ideal for Picking.
Systems for Small Parts.
A variety of part sizes can be handled: F3W-D sensing,
width: 100 mm, F3W-E sensing width: 50 mm.
Low-profile Sensor with thickness of 8 mm annd enlargeable,
work opening E2B-M30LS10-M1-C2.
Models with connectors are also available.
Support for XS5 Smartclick Connectors reduces work and,
simplifies wiring.